Brand NewAdvanced Systems & Designs, 600-22-LH600-MTI, Digimatic FlashCable for Mitutoyo LH-600E/EG Height Gage Display
Features:
Send data to GageMux gage interface or other Digimatic input devicesThis FlashCable gage interface is engineered to convert the output on the Mitutoyo LH-600E/EG Height Gage Display to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable connects directly to the RS-232C male connector on the Mitutoyo LH-600E/EG Height Gage Display.
This FlashCable gage interface is designed to work with GageMux gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable does not obtain any power from the Mitutoyo LH-600E/EG Height Gage. When properly connected to GageMux interface, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. On devices other than the GageMux, pin 9 of the input port connector must provide a 5vDC power to the FlashCable.
When the FlashCable gage interface is powered by the GageMux the LED on the FlashCable turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered by the following method:
A detailed operation manual is included with this FlashCable gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable gage interface to the default RS232 communication settings on the Mitutoyo LH-600E/EG Display. The Mitutoyo LH-600E/EG Height Gage and FlashCable gage interface must be set to the same RS232 communication values. Refer to the Mitutoyo LH-600E/EG Height Gage Display user manual for more information on how to set-up external communication using the RS-232C interface. This FlashCable gage interface comes in a six foot standard cable length.
There are currently no reviews for this product. You can leave the first review and share your experience.