Advanced Systems & Designs, 600-22-EMVECO-MTI, Emveco 200 Microgage Digimatic Output FlashCable
Features:
- ASDQMS Digimatic output FlashCable for Emveco 200 Series Microgage
- Sends data to GageMux or devices that recognize the Digimatic Signal
Sends data to GageMux or similar devices Through the use of the Advanced Systems and Designs - ASDQMS FlashCable gage interface and GageMux USB, and the RS-232 serial port on the Emveco 200 Series Microgage, the Emveco Microgage is able to communicate with your SPC data collection system.
The ASDQMS FlashCable gage interface is engineered to change the output on the Emveco 200 Series Microgage to an output in Digimatic format. The male connector on the Advanced Systems & Designs FlashCable gage interface connects directly to the 9-pin female connector on the Emveco Microgage.
This FlashCable Digimatic gage interface is designed to work with GageMux or other similar devices that recognize the Mitutoyo Digimatic signal. When connected to the GageMux, the input port provides the power to the FlashCable gage interface. When using devices other than the GageMux please insure that pin 9 of the 10-pin connector provides a 5v DC supply to the FlashCable gage interface.
The LED on the FlashCable gage interface turns GREEN when it is connected properly. The LED turns RED when the data is being sent or a data request is requested.
The data transfer can be triggered by the following methods:
- Using the data output on the Emveco 200 Series Microgage
A detailed operation manual is included with this ASDQMS FlashCable gage interface. The FlashCable gage interface is normally set to the to the default settings on the Emveco 200 Series Microgage. Both the Emveco Microgage and FlashCable gage interface must be set to same values. Refer to the Emveco 200 Series Microgage operation manual for more information on RS232 serial communication. Six foot standard length.