Advanced Systems & Designs, 600-22-DIGIMAR817-MTI, Digimatic FlashCable for Mahr Digimar 817 CLM Quick Height
Features:
- Digimatic output FlashCable interface cable for the Mahr Digimar 817 CLM Quick Height Display
- Sends data to GageMux gage interface or other devices that recognize the Digimatic Signal
- Uses the DATA key on the Mahr Digimar display to Send data
Send data to GageMux gage interface or other Digimatic input devicesThis FlashCable gage interface is engineered to convert the output on the Mahr Digimar 817 CLM Quick Height to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable connects directly to the male connector on the Mahr Digimar 817 CLM Quick Height Display.
This FlashCable gage interface is designed to work with GageMux gage interface or similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable does not obtain any power from the Mahr Digimar 817 CLM Quick Height Display. When properly connected to GageMux interface, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. On devices other than the GageMux, pin 9 of the input port connector must provide a 5vDC power to the FlashCable.
When the FlashCable gage interface is powered by the GageMux the LED on the FlashCable turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered by the following method:
- Using the DATA key on the Mahr Digimar 817 CLM Quick Height Display
A detailed operation manual is included with this FlashCable gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable gage interface to the default RS232 communication settings on the Mahr Digimar 817 CLM Quick Height Display. The Mahr Digimar 817 CLM Quick Height Display and FlashCable gage interface must be set to the same RS232 communication values. Refer to the Mahr Digimar 817 CLM Quick Height operating instructions for more information on how to set-up external communication using the RS-232C interface.
Six foot standard cable length.