Brand NewAdvanced Systems & Designs, 600-22-ADAMPMB-MTI, Digimatic FlashCable for Adam Equipment PMB Moisture Analyzer
Features:
Send data to GageMux gage interface or other Digimatic input devicesUsing the male RS-232C serial interface connector on the Adam Equipment PMB Moisture Analyzer you are able to Send data through this FlashCable and GageMux USB interface to your data collection software program. This FlashCable gage interface is engineered to change the output on the Adam Equipment PMB Moisture Analyzer to an output in a Mitutoyo Digimatic format. The 9-pin female connector on the Advanced Systems & Designs FlashCable Digimatic gage interface connects to the RS232C serial interface male connector on the Adam Equipment PMB Moisture Analyzer.
This FlashCable gage interface is designed to work with GageMux gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable does not obtain any power from the gage. When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. If using devices, other than the GageMux pin 9 of the input connector must provide 5v DC power supply to the FlashCable gage interface.
The LED on the FlashCable interface will turn GREEN to indicate that the FlashCable gage interface is connected properly. The LED briefly flashes RED when the data is being sent or a data request is triggered using the following.
The data transfer can be triggered using any of the following methods:
An operation manual is included with this FlashCable gage interface. Advanced Systems & Designs sets the FlashCable at the factory to the default RS232 communication settings on the Adam Equipment PMB Moisture Analyzer. Refer to the Adam Equipment PMB Moisture Analyzer operation manual for more information on external communication with peripheral devices.
Six foot standard interface cable lengt.
There are currently no reviews for this product. You can leave the first review and share your experience.