Advanced Systems & Designs, 600-22-ADAMCBC-MTI, Digimatic FlashCable for Adam Equipment CBC Series Counting Scale
Features:
- Digimatic output FlashCable gage interface for Adam Equipment CBC Series Counting Scale
- Sends data to GageMux or devices that recognize the Digimatic Signal
- Several options to trigger data
Send data to GageMux or other Digimatic input devices.The CBC model scales are metric weight only scales. The CBCa scales can be changed from pounds to kilograms.Digimatic output FlashCable is capable for use on either model with no adjustments required on your part.This FlashCable gage interface will change the output on the Adam Equipment CBC Series Counting Scale to an output in a Digimatic format. The 9-pin female connector on the Advanced Systems & Designs FlashCable gage interface will connect directly male connector on the Adam Equipment CBC Series Counting Scale.
This gage interface is designed to work with GageMux or other similar devices that recognize the Mitutoyo Digimatic signal. When connected to GageMux, the GageMux provides the power to the FlashCable. When using devices other than the GageMux make sure pin 9 of the 10-pin connector provides a 5VDC supply to the FlashCable gage interface.
When connected to the GageMux gage interface, the LED on the FlashCable gage interface turns GREEN. This indicates that the FlashCable gage interface is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
- Using the PRINT button on the Adam Equipment Counting Scale
- Using 300-1S in-line handswitch
- Using a Footswitch on the FlashCable gage interface (not included)
- Using the Footswitch on the GageMux USB (or equivalent triggering method on similar devices)
- Sending a gage read command from the computer to the gage
A detailed operation manual is included with this FlashCable gage interface. Advanced Systems & Designs normally sets the FlashCable gage interface to the default settings on the CBC Series Counting Scale. Make sure both the Adam Equipment Counting Scale and FlashCable gage interface are set to the same values. Refer to the Adam Equipment CBC Series Counting Scale user guide for more information on external communication. Six foot standard cable length.