Brand NewAdvanced Systems & Designs, 600-22-ACCULABAL-MTI, Digimatic FlashCable for Acculab AL-Series Balance
Features:
Send data to GageMux gage interface or other Digimatic input devices.This ASDQMS FlashCable gage interface is engineered to change the output on the Acculab AL-Series Analytical Balance to an output in a Mitutoyo Digimatic format. The female connector on the Advanced Systems & Designs FlashCable gage interface connects directly to the 9-pin male RS-232-C data interface serial port connector on the Acculab Balance.
This Advanced Systems and Designs FlashCable interface is designed to work with GageMux gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable receives power from GageMux gage interface or other similar Digimatic input devices. If you are using devices other than GageMux multiple input gage interface, make sure pin 9 of the 10-pin input connector provides a 5 volt DC supply to the FlashCable interface cable.
The LED on the FlashCable will turn GREEN when properly connected to GageMux gage interface or other similar Digimatic input devices. The LED turns RED when the data is triggered or a data request is triggered.
The real-time data transfer can be triggered using any of the following methods:
This ASDQMS FlashCable gage interface comes with a detailed operation manual. Normally set the FlashCable gage interface to the default settings on the Acculab AL-Series Analytical Balance. Make sure the Acculab AL-Series Analytical Balance is set to the default values or the values shown in the FlashCable gage interface operating manual. Refer to the Acculab AL-Series Analytical Balance operation manual for more information on how to establish RS232 external communication with peripheral devices.Six-foot standard cable length.
There are currently no reviews for this product. You can leave the first review and share your experience.