ASD/QMS 600-111-10-USB SmartCable USB E2 Maxum III Maxum Plus

Advanced Systems & Designs, 600-111-10-USB, E2 Maxum III, Maxum Plus SmartCable USB

Features:

• ASDQMS SmartCable USB for Mahr Federal E2 Maxum III or Maxum Plus digital indicator
• Sends data to SPC data collection programs
• Multiple data triggering options

Sends data to SPC data collection programsThe E2 Maxum III or Maxum Plus Indicator is connected to the 2121429 SmartCable USB gage interface using the 10-pin connector. The SmartCable USB connects directly to the gage - no additional cables required. This Advanced Systems & Designs SmartCable USB connects the Mahr Federal E2 Maxum III or Maxum Plus digital indicator to a computer as a COM port (or virtual Com Port) and will allow the gage to Send data to communication and terminal emulation programs (i.e. HyperTerminal) or any SPC data collection software program.

Note: This SmartCableUSB will Not Send data directly to a spreadsheet program such as Excel, without using a separate software program.

The output of the SmartCable USB is a standard USB 2.0 COM port signal and the USB connection supplies power to the cable. The gage cannot obtain power from the SmartCable USB - the gage requires a separate power supply (batteries) of its own.

Readings can be triggered by any of the following:

• Pressing the push button on the SmartCable USB
• Depressing a connected footswitch (not included)
• Pressing the Send button on the gage (if it has one)
• Sending a gage read command from the computer to the SmartCable USB gage interface

This Advanced Systems and Designs SmartCable USB gage interface is capable of Sending data in several modes; read only, continuous, continuous with delay, disable pushbutton, and others. A detailed operation manual is included with this Advanced Systems and Designs SmartCable USB including instructions on how to configure your Mahr Federal gage for the proper output format.