Features:
- Rugged design built to withstand harsh shop floor conditions
- Bright red indicator lights for each input
- RS-232 output through a 25-pin DB25 female connector
- Can be used to daisy-chain multiple units and connect up to 64 digital gages to a single RS-232 serial port
- Operating manual, serial cable with 9-pin output, and power supply included
This GageMux RS232 is original four-port multiple gage interface which allows you to connect up to four (4) digital gages to a single RS-232 serial port on a desktop computer or laptop. Output on the GageMux RS232 gage interface is a 25-pin DB25 female connector. A 9-volt DC power supply is included as well as a 25-pin to 9-pin serial cable. The GageMux RS232 will work with gages that have digital outputs compatible with Mitutoyo digital gages. Gages available from Chicago Dial, Federal, Ono Sokki, and many others manufacturers, have digital outputs compatible with Mitutoyo digital gages.
Note: This 100-40P GageMux has been replaced by updated 500-40-USB GageMux USB gage interface. Click on the link to see new GageMux USB which has the same functionality plus several new features.
The GageMux RS232 is configured through internal DIP switches or commands from a host computer. These commands include:Request a reading from a channel
- Change the setup of a channel
- Change the output string mode
- Change the foot switch mode
- Reset the GageMux RS232
Readings are initiated by pressing a Send button on the gage, pressing a footswitch (not included) connected to the GageMux RS232, or a host command from a computer. A detailed operation manual is included with this RS232 GageMux multiple input gage interface. Leadtimes are slightly longer for this item since new GageMux USB has replaced this model.
Gage Inputs: Mitutoyo compatible gages including all MItutoyo Digimatic output gages, Mahr Federal Maxum Plus, III, uMaxum, CDI Logic Series, Starrett Wisdom, Chatillon DFIS, Fowler Ultra Logic, Ono Sokki EG-225, and many more!
