Buy Viking LRR-4, Long Range 4 Channel Receiver

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Features:

Read range of up to 400 ft (line of sight)
Secure, digital, anti-playback wireless communications
4 channels of 26 Bit Wiegand data output
Optional external antenna connector
LED and transducer transmitter feedback
Adjustable Read Range
Removable terminal block for easy wiring
Cable grommet included for sealing cable exit

Applications:

AES-2000: Accessible Entry System with ES-3 controller (DOD 202)
AES-2005: Accessible Video Entry System with ES-3 controller (DOD 204)
C-4000: Apartment / Office Entry Controller (DOD 164)
ES-1: Stand Alone Keyless Entry System (DOD 193)
ES-3: Entry System Controller (requires power adapter) (DOD 195)
K-1200-IP: VoIP 12 Button Apartment Entry Phone (DOD 271)
K-1205-IP: VoIP Apartment Entry Phone with Camera (DOD 274)
K-1270-IP: VoIP Apartment Entry Phone with Card Reader (DOD 274)
K-1275-IP: VoIP Apartment Entry Phone with Camera/Card Reader (DOD 274)
K-1700-IP: VoIP Entry Phone with Keypad (DOD 253)
K-1705-IP: VoIP Entry Phone with Keypad/Camera (DOD 254)
K-1770-IP: VoIP Entry Phone with Keypad/Card Reader (DOD 257)
K-1775-IP: VoIP Entry Phone with Camera/Card Reader (DOD 258)
K-1770-3: Entry Phone with Keypad and Card Reader (DOD 275)
K-1775-3: Entry Phone with Camera and Card Reader (DOD 280)
K-1900-8-IP: VoIP Entry Phone with Handset and Keypad (DOD 361)

Viking's model LRR-4 Long Range 4 Channel Receiver features an integrated receive antenna and can be used with Viking's LRT-4 Long Range Wireless 4 Channel Radio Transmitters to create a high frequency, long-range (RFID) identification solution. The LRT-4 Transmitters have four buttons, each corresponding to its own Wiegand output on the LRR-4 Receiver.

The LRR-4 Receiver operates at 433 MHz allowing a transmission range of up to 400 ft (line of sight). The LRR-4 receiver has an adjustable read range, terminal block with 4 channel Wiegand data output and a transducer and LED to confirm transmitter button press. The LRR-4 has a conformal coated circuit board mounted in a NEMA 4, 4x rated box for use in outdoor applications.

For more information, please see pdf file User Manual

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Viking Winch items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Cable Requirements	24 AWG minimum, multi-conductor stranded with an overall foil shield, for example Belden 9540 or similar. Per the SIA’s Wiegand specification, maximum cable length is 400 feet (121.92 m).
Grounding	Shield (drain) continuity must run from the Receiver to the access panel. Shield and reader ground must be tied together at the access panel and connect then to an earth ground at one point.
Power	Power required is 12 VDC nominal at 120mA. The Receiver may be powered by the access panel. A linear power supply is recommended for best operation. Power Supply is not included, but can be powered directly from Viking model ES-1, K-1700-IP, C-4000, AES-2000, and AES-2005 entry systems. When used with an ES-3 a seperate 12 VDC power supply is required.
Mounting	The Receiver may be mounted indoors or outdoors. The base of the enclosure includes a drill template providing mounting provisions to a wall box (standard North American and European), as well as pre-drilled holes in the four corners allowing mounting to a flat surface
Read Range Adjustment	As shipped, the Receiver is set for the maximum read range, which is nominally up to 400 feet. This may be reduced by adjusting the range pot in the counter-clockwise direction. Additionally, for optimal read range it is important that the Receiver be mounted as far from potential interference sources as possible. These sources may include, but are not limited to, large metal obstructions, as well as magnetic fields and radio transmissions. Note for each installation, read range may vary.
External LED Indicator	(Beeper Switch must be set to ON in order for the external LED to operate) Amber
Amber	Normal powered on state
Flash Green	An activated Transmitter button press has been received and processed
Flash Red	A non-activated Transmitter button press has been detected
Off	Receiver is not powered on, or failed to power up successfully (or Beeper Switch is turned to OFF)
Antenna Switch	As shipped, the Receiver’s Antenna Switch is set in the INT position. If a separate antenna is to be used, then the switch should be set in the EXT position.
Beeper Switch	As shipped, the Receiver’s Beeper Switch is set in the ON position. If the installation technician prefers to disable the beeper and External LED Indicator, then the Beeper Switch should be set in the OFF position.
10-Pin Terminal Block	Refer to the information below for cabling to the Receiver
AD0	Button One, Wiegand Data 0, Channel A (GREEN)
AD1	Button One, Wiegand Data 1, Channel A (WHITE)
BD0	Button Two, Wiegand Data 0, Channel B (GREEN)
BD1	Button Two, Wiegand Data 1, Channel B (WHITE)
CD0	Button Three, Wiegand Data 0, Channel C (GREEN)
CD1	Button Three, Wiegand Data 1, Channel C (WHITE)
DD0	Button Four, Wiegand Data 0, Channel D (GREEN)
DD1	Button Four, Wiegand Data 1, Channel D (WHITE)
GND	Power, 0VDC (Ground)
VDC	Power, 12VDC Nominal

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Cable Requirements	24 AWG minimum, multi-conductor stranded with an overall foil shield, for example Belden 9540 or similar. Per the SIA’s Wiegand specification, maximum cable length is 400 feet (121.92 m).
Grounding	Shield (drain) continuity must run from the Receiver to the access panel. Shield and reader ground must be tied together at the access panel and connect then to an earth ground at one point.
Power	Power required is 12 VDC nominal at 120mA. The Receiver may be powered by the access panel. A linear power supply is recommended for best operation. Power Supply is not included, but can be powered directly from Viking model ES-1, K-1700-IP, C-4000, AES-2000, and AES-2005 entry systems. When used with an ES-3 a seperate 12 VDC power supply is required.
Mounting	The Receiver may be mounted indoors or outdoors. The base of the enclosure includes a drill template providing mounting provisions to a wall box (standard North American and European), as well as pre-drilled holes in the four corners allowing mounting to a flat surface
Read Range Adjustment	As shipped, the Receiver is set for the maximum read range, which is nominally up to 400 feet. This may be reduced by adjusting the range pot in the counter-clockwise direction. Additionally, for optimal read range it is important that the Receiver be mounted as far from potential interference sources as possible. These sources may include, but are not limited to, large metal obstructions, as well as magnetic fields and radio transmissions. Note for each installation, read range may vary.
External LED Indicator	(Beeper Switch must be set to ON in order for the external LED to operate) Amber
Amber	Normal powered on state
Flash Green	An activated Transmitter button press has been received and processed
Flash Red	A non-activated Transmitter button press has been detected
Off	Receiver is not powered on, or failed to power up successfully (or Beeper Switch is turned to OFF)
Antenna Switch	As shipped, the Receiver’s Antenna Switch is set in the INT position. If a separate antenna is to be used, then the switch should be set in the EXT position.
Beeper Switch	As shipped, the Receiver’s Beeper Switch is set in the ON position. If the installation technician prefers to disable the beeper and External LED Indicator, then the Beeper Switch should be set in the OFF position.
10-Pin Terminal Block	Refer to the information below for cabling to the Receiver
AD0	Button One, Wiegand Data 0, Channel A (GREEN)
AD1	Button One, Wiegand Data 1, Channel A (WHITE)
BD0	Button Two, Wiegand Data 0, Channel B (GREEN)
BD1	Button Two, Wiegand Data 1, Channel B (WHITE)
CD0	Button Three, Wiegand Data 0, Channel C (GREEN)
CD1	Button Three, Wiegand Data 1, Channel C (WHITE)
DD0	Button Four, Wiegand Data 0, Channel D (GREEN)
DD1	Button Four, Wiegand Data 1, Channel D (WHITE)
GND	Power, 0VDC (Ground)
VDC	Power, 12VDC Nominal

Return and Warranty

Please note that return requests for Viking Winch items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Viking LRR-4 Long Range 4 Channel Receiver

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews