Features:
- Non-volatile memory, no batteries required
- Stores up to eight 32-digit phone numbers per input (sixty-four 32-digit numbers total)
- 8 minutes of record time (1 minute per input)
- Programmable message repeat counter
- Programmable lap counter
- Eight inputs programmable normally open or normally closed and enabled or disabled
- Programmable ring delay for remote programming and alarm polling
- Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
- Programmable resume timer for each input (time following reset for input to become active again)
- Call progress detection
- Programmable ringback limit for call progress
- Remote security and access codes
- Store caster mode
- Local or remote programming and recording
- RS-232 port for programming via a PC
- Compatible with the Viking RC-2A and RC-3 remote DTMF controllers
- Phone numbers may be programmed as pager numbers (no voice message played)
- Programmable hookswitch flash before dialing
- Line level input for loading pre-recorded messages into the unit
Applications:
- Security / burglar / fire alarm notification
- System alarm or equipment malfunction notification
- Operating temperature warning notification
- Contacting personnel via numeric pagers
- Store Caster to provide assistance
- Department stores
- Grocery stores
- Hardware stores
- Gas stations, etc.
Certifications:
Viking's K-2000-DVA is a fully programmable multi-input, multi-number auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000-DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to one minute in length specific to that input. The messages can be recorded locally or remotely.
When configured as an alarm dialer, the K-2000-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection. The K-2000-DVA can also be set up as a store caster (no dialing), for on-site promotional or assistance announcements.
The K-2000-DVA can be programmed with a touch tone phone or a PC with a serial port connection.
For more information, please see User Manual