E-1600-03-IP Includes Only:
- 1 x E-1600-03-IP
- 1 x Hexkey 5/64
- 3 x Gel-Filled Butt Connectors
- 1 x Mounting Plate
- 2 x Screw Set 8-32 Socket
- 1 x Wire Nut
Features:
- Automatic polling and programming software included
- 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
- Red "Call Connected" LED indicator
- SIP compliant
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for "Push to Talk" mode
- Network downloadable firmware
- Handsfree operation
- Meets ADA requirements for Emergency Phones:
- Automatically lights the "Call Connected" LED
- Transmits a unique location ID code or voice announcement
- Grade 2 Braille label for the visually impaired
- Non-volatile digital voice announcer with 28 seconds of voice memory
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Remotely programmable
- Diagnostics for testing mic, speaker, relay
- Extended temperature range: -40°F to 140°F (-40°C to 60°C)
Applications:
- Elevators
- Parking ramps / lots
- Emergency pool phones
- ATM machines
- Medical centers
- Silent hold-up alarm dialer when used with a Viking PB-1 Panic Button Kit (DOD 233)
- Area of refuge locations
- Lobbies
- Entryways
- Campus emergency stations
- Stadiums
- Convention centers
- Public access areas
Certifications:
- CE
- Canada ICES
- FCC Part 15
- ADA
- SIP
The E-1600-03-IP ADA and CE Compliant VoIP Emergency Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-03-IP phone meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The emergency phone can dial up to 5 programmable emergency communication phone numbers.
The E-1600-03-IP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. A "Call Connected" LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. All emergency phone units are PoE powered.
For more information, please see 
User Manual and Quick Start Guide
