Power Source | 120 V AC, 60 Hz |
Power Consumption | 690 VA (at rated output), 260 W (According to UL60065), 63 W (at no signal) |
Rated Output | 240 W, 21 Ohm (according to UL60065) 200 W, 25 Ohm (according to UL2572) 200 W, 25 Ohm (according to CAN/ULC-S576 with separate UPS) 100 W, 50 Ohm (according to CAN/ULC-S576) (All total of Speaker output 1 - 6 and Direct Output) |
Frequency Response | 50 Hz - 20 kHz, +/-3 dB (at 1/3 rated output), 800 Hz - 2.8 kHz (according to UL2572); 400 Hz - 4 kHz (according to CAN/ULC-S576) |
Distortion | Under 0.7% (at rated output, 1 kHz) |
S/N Ratio | Over 85 dB |
Input | External amplifier Input: 70 V line, removable terminal block (14 pins) Local Input: -50 dB* (MIC) / -10 dB* (LINE) (changeable), 600 Ohm , electronically balanced, removable terminal block (14 pins) |
Output | Speaker output 1 - 2: Max. (240 W) per output Speaker output 3 - 6: Max. (100 W) per output Speaker output 2 - 6: Total within rated output, removable terminal block (14 pins) Allowable minimum load: 245 Ohm (20 W) at 70 V line for speaker line failure detection Direct output: Direct output from internal or external amplifier, removable terminal block (16 pins) |
VM Link | Input: Connecting the VM-3240VA AMQ; RJ45 female connector Output: Connecting the VM-3240E AMQ; RJ45 female connector Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
General Control | Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, removable terminal block (14 pins) Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,operating current: 10 mA or less, removable terminal block (14 pins) |
Emergency Control | Input 1 - 5: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, RJ45 female connector Input 6: Isolated voltage input, Inactive: -24 V+/-20%, Active: +24 V+/-20%, RJ45 female connector Status out: Relay contact output, withstand voltage: 40 V DC, operating current: 2 - 300 mA, RJ45 female connector |
Power Input/Output | Power in: Connecting the VX-2000DS AMQ only (operating range: 20 - 40 V DC); PS out: 28 V DC / 18 A; M4 screw terminal, distance between barriers: 11 mm |
22 V DC Output | 22 V DC Special Applicaiton, Maximum feeding current 0.3 A (for RM-200M only) |
DS Link | Connecting the VX-2000DS, RJ45 female connector; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) |
Finish | Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black, paint |
Operating Temperature | 0 to 49°C (32 to 120°F) |
Operating Humidity | 5% to 95% RH (no condensation) |
Dimensions | 482 (W) x 132.6 (H) x 407 (D)mm (18.98" x 5.22" x 16.02") |
Weight | 16.5kg (36.38 lbs) |
Accessories | AC power cord (2m) x 1, Link cable (3m) x 2, Plastic foot x 4, Plastic foot mounting screw x 4, Removable terminal plug (14 pins) x 3, Removable terminal plug (16 pins) x 1 |
UL Certified | UL 2572 |