| Power Source | 120 V AC, 50/60 Hz |
| Power Consumption | 16 W (250 mA) (at rated), 21 W (330 mA) (max.) |
| Audio Input (*3) | Input: 2 inputs (2 P/input), Max. 0 dB (*1), 600 Ohm or less, balanced,
with a semi-fixed volume for adjustment (0 to -25 dB)
Control: 2 inputs (2 P/input), no-voltage make contact input, open voltage: 12 V DC,
short-circuit current: 10 mA
Removable terminal block (8 pins) |
| Audio Output (*3) | Output: 2 outputs (2 P/output), Max. 0 dB (*1), 600 Ohm or less, balanced
Control: 2 outputs (2 P/output), relay contact output, contact capacity: 24 V DC/0.5 A
Removable terminal block (8 pins) |
| Contact Input (*3) | 16 inputs, no-voltage make contact input, open voltage: 12 V DC,
short-circuit current: 10 mA, removable terminal block (18 pins) |
| Contact Output (*3) | 16 outputs, relay contact output, contact capacity: 24 V DC/0.5 A,
removable terminal block (18 pins) |
| PBX I/F (*3) | PBX input and output: 2 channels, Max.: 0 dB (*2) or less, Average: -15 dB (*2) or less,
600 Ohm , balanced, mini-clamp connector (2 pins),
with adjustment functions for both input and output
(Input: 0 to +15 dB, Output: -15 to 0 dB), Analog E andM interface |
| Tie-line I/F (*3) | Tie-line input and output: 2 channels, Max.: 0 dB (*2) or less, Average: -15 dB (*2) or less,
600 Ohm , balanced, mini-clamp connector (2 pins)
Signal method: EXES-2000/EXES-6000 tie-line method
Selective signal: DTMF signal |
| Network Section | - Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
- Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
- Audio packet transmission system: Unicast, Multicast
- Number of paging destinations: Unicast (max. 16), Multicast (max. 191)
- Connector: RJ45 connector
- Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
- Quantifying bit number: 16-bit
- Voice encoding method: Sub-band ADPCM, Cryptosystem
- Voice packet loss recovery: Silence insertion
- Audio delay time: 80 ms, 320 ms (controllable on the software)
|
| Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp |
| Others | Firmware update function, System registration data entry hold facility,
Time of day hold facility, Reset switch (front panel) |
| Installation Method | Rack, Desk, Surface mount |
| Operating Temperature | 0 °C to +40 °C |
| Operating Humidity | 90 %RH or less (no condensation) |
| Finish | Pre-coated steel plate, black, 30 % gloss |
| Dimensions | 420 (W) x 44.3 (H) x 239.5 (D) mm |
| Weight | 2.8 kg |
