| Type | 8-channel mixer power amplifier |
| Power Requirement | AC mains, 120 V, 60 Hz |
| Power Consumption | 100 W |
| Output Power | 60 W RMS |
| Power Band Width | (D) 20 - 20,000 Hz, 0.5% THD, (T) 50 - 20,000 Hz, 0.5% THD |
| Frequency Response | (D) 20 - 20,000 Hz, +/-1 dB
(T) 20 - 15,000 Hz, +/-1 dB, (T) 20 - 20,000 Hz, +1 dB, -3 dB |
| T.H.D | 0.02% at 1 kHz, rated output |
| Inputs | Eight Input Ports : Each port accepts any input modules.
One Bridging Input/Output |
| Input Sensitivity /Impedance | Input Port #1 to #8 : 100 mV/10 k Ohm
Bridging Input/Output : 100 mV/3.3 k Ohm |
| Preamp OUT /Power Amp IN | 1000 mV into 600 Ohm /1000 mV, 10 k Ohm |
| Outputs(T)=Transformer (D)=Direct | Main (T) : 8 Ohm , 25 and 70 volts, balanced, Main (D) : 4 Ohm , unbalanced
Aux : 10 k Ohm , 1 V |
| Output Regulation(1kHz) | (D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load |
| S/N Ratio(Band Pass 20 - 20,000 Hz) Tone defeat switch on | Master volume min : 90 dB
Master volume max : 77 dB
Power amplifier only : 105 dB |
| Tone Controls | Bass : +/-10 dB at 100 Hz, Treble : +/-10 dB at 10 kHz |
| Controls | 8 Input gain control 1 Master gain control 1 Bass control
1 Treble control 1 Power ON/OFF switch 1 Tone defeat switch
1 Low-Cut switch (60 Hz, 6 dB/octave) |
| Indicators | 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED |
| Protection | Self-protection, with AC fuse (inside) |
| Connectors | - Input No.1 to No.8 : Card-edge connector
- Bridging, Mixer preamp. output, Power amp. input, Aux output : RCA phono jack
- Output : Screw-terminal strip
- Mute, Remote VR : Screw-terminal strip
- AC outlet : 3-pin grounding type
- AC power cord/plug : SJT, 3-prong type
|
| Temperature Range | -10°C - +60°C (12°F - 140°F) |
| Finish | Black |
