Thor Broadcast, H-2SDI-DVBT-IPLL, 2Ch HD-SDI to DVB-T Encoder Modulator Out. IPTV Streamer
Features:
- QPSK QAM-16/26 RF Out up to 4 Adjacent
- IPTV Output Unicast or Multicast IGMP UDP, RTP, RTSP
- ASI Output with multiplexer cherry picking
- Any SDI Input up to 3G-SDI at1080p60
- ASI Input SPTS or MPTS up to 120 Mbps
- Fully Network Managed through browser
- Integrates fully independent encoders with a multiplexer and modulator
- Modulates up to 4 adjacent QPSK, QAM-16/64 carriers with up to 28 Mbps each
- Supports full HD 1080p60 input and encoding from any HDMI digital video source
- Each encoder independently configured: supports all standard HDTV resolutions
- IPTV output on second network port in UDP IGMP Multicast or Unicast format
- DVB-ASI output on mirrored BNC terminals for use in broadcasting systems
- Fully network managed device with all settings configurable through web browser
Thor Broadcast SDI-DVBT-IP and SDI-DVBT-IPLL Product Lines
Thor HD-SDI to DVB-T modulators are combination devices that bundle real time HD hardware encoders with a managed program stream multiplexer and agile RF QPSK modulator. Each chassis can encode up to 4 channels of HD-SDI video to MPEG-2 or H.264 and modulate the programs on up to 4 DVB-T carrier outputs. In addition to the encoded programs, the unit can also modulate programs encoded externally via an ASI input. This platform is most commonly used by large organizations or broadcasters that own SDI matrix routers. This platform is ideal for corporate MATV systems or in house HD video distribution from SDI sources. This platform is not recommend for broadcast head end signal origination due to lack of 708 closed captioning support. For broadcasters requiring government mandated 708 captioning and Dolby AC/3 audio please contact a sales representative.
Digital Video Broadcast: Terestrial DVB-T Modulation Standard
The DVB-T standard is the worlds most widely adopted radio frequency modulation standard for digital video broadcast over terrestrial systems. This standard is used throughout the world for both cable and over the air digital video broadcast systems. The standard was first used in the United Kingdom, and has since gained in acceptance in over 90 worldwide countries. This standard supports the original DVB-T modulation protocols for both QPSK and QAM16/64. This chassis outputs either 2 or 4 adjacent RF carriers and can distribute programming anywhere between those channels. The unit also supports ingestion of externally encoded programming via the ASI input. The ASI input can be parsed for up to 120 Mbps of incoming programming based on model hardware and software selection.
SDI-DVBT-IP: Modulator Chassis with HD-SDI Encoder Cards
HD-SDI uncompressed digital video is commonly used in broadcasting and professional AV systems due to its convenience. Serial Digital video can be carried over single conductor coax cables and typically employ common BNC connectors. HD-SDI carries the same digital video data as HDMI, but without all complicated digital content protection (DCP) and HDCP trouble. Thor multichannel encoder modulator chassis systems support encoder card input configurations from 1 to 4 channels. These cards are in both standard and low latency versions. These cards convert HD-SDI inputs to DVB-T compatible program streams.
DVBT-IPLL: Low Latency Encoding Option
Unit model numbers that include "LL" indicate that model includes Thor's low latency encoding option. This feature reduces the time delay between video input and encoded program output by more than 10 times. Standard model encoder modulator chassis systems typically have an encoding latency of 700-1200 ms depending on encoding parameters and output configurations. For many applications, adding approximately 1 second latency doesn't make a difference. For other applications, such as live events; 1 second delay is very noticeable and prevents modulation from being used in distribution systems. The solution to live video broadcast applications is the Low Latency upgrade option for the encoders. IPLL models typically have an encoding latency of approximately 70-110ms, making them suitable for distribution of live video events. Contact a Thor sales representative today for more information on encoding latency.
Encoder Card Compatibility between Modulator Chassis
Thor HDMI-DVBT-IP line of encoder modulators are designed for high quality distribution of broadcast quality video over coax cable. These systems are in many configurations for a wide range of applications. This page covers models for a specific input video type combined with a modulator chassis programed for a specific output format. It is important to note that encoder card types can usually be combined with encoder cards for other video types. For custom model configurations please contact Thor directly for pricing. While most firmware for Thor modulator chassis is inter-compatible; not all hardware will work with all software. Thor representatives for free design and consultation service.
