Televes, 560383, Mast Amplifier with Boss-Tech and "F" Power Supply Unit with 1 Input
Features:
- Use this installation to join the "cord-cutting" movement and enjoy top-rated HDTV shows for free: ABC HD, CSO HD, FOX HD, PBS HD, the CW, and Univision HD.
- Very fine-tuned filtering to avoid any out-of-band interference, including FM filtering, and Repack frequencies (from 608MHz onwards)
- BOSS-Tech devices integrated: the amplifier adapts automatically and dynamically their gain to the signal conditions at the time, ensuring an optimum level of amplification and that the optimum signal is delivered at all times. It also avoids overload when there is interference present or enhanced conditions
- Dual-band amplification: the VHF and UHF gains are adjusted independently according to the needs of each band. This also helps avoid intermodulation interference between the bands
- Very low noise
- High-screening Zamak chassis
- "F" connectors
- ON/OFF switch to allow DC to pass towards the input for the powering of a BOSS system
- Easy mounting. Equipped with a plastic tie for mast mounting
- Resistant ABS-plastic black case for outdoor installation
An active device that filters and amplifies terrestrial television signals coming from a single antenna, optimizing LTE band rejection up to channel 36 (Repack Ready). Equipped with a single input for amplification on LowVHF, HighVHF, and UHF bands. The amplifier is powered through the output coaxial cable.
The kit is complemented with a domestic 12 V-power supply unit (220mA), which is included in the installation kit to provide the amplifier with the necessary power. The PSU powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Furthermore, it is equipped with two outputs. This power supply is UL-certified (US plug).
These devices allow the installer to adapt the output level according to the necessary characteristics of the distribution network.
Applications
Receiving from one transmitting location using one antenna:
- The amplifier will automatically adjust its gain for each band independently over time to ensure optimum signal delivery. No configuration/settings are needed.
- The antenna used should be able to receive the desired frequency bands: LowVHF, HighVHF, or UHF.
Receiving from two or more transmitting locations using one antenna:
- The amplifier will automatically adjust its gain for each band independently over time to ensure optimum signal delivery. No configuration/settings are needed.
- The antenna used should be able to receive the desired frequency bands: LowVHF, HighVHF, or UHF.
Dedicated VHF and UHF antennas in fringe reception scenarios:
- To optimize the signal quality in fringe situations and when band-dedicated UHF-only and VHF-only antennas are used, it is recommended to combine the antenna's signals with a VHF/UHF diplexer (Ref. 404010) and connect the resulting feed to the amplifier.
