Buy Tek-Trol Tek-LCD 7805B-0L0, Large Display Loop-Powered Meter

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Pictures shown are for illustrative purpose only. Actual product may vary

Tek-Trol, Tek-LCD 7805B-0L0, Explosion-Proof Large Display Loop-Powered Meter

Features:

4-20 mA input
Modern, sleek and practical enclosure for safe areas
3½ digits, 1" (0.08 ft) display
Display mountable at 0°, 90°, 180°, and 270°
Easy calibration and installation
1 V drop (4 V with backlight)
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for wall or pipe mounting
HART protocol transparent

The Tek-LCD 7805B is an explosion-proof, loop-powered process Indicator with 1" display digits in a field-mountable enclosure designed for demanding applications in hazardous areas or in the harshest environmental conditions. The meter derives all of its power from the 4-20 mA loop with a small 1 V drop so there is no need to run additional, costly power lines into a hazardous area. The Tek-LCD 7805B loop-powered indicator carries FM, CSA, ATEX, and IECEx approvals for use in hazardous areas. It is programmed using four easy-to-access, front-mounted control dials.

Dimensions:

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Tek-Trol items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Input range

4-20 mA

Display update rate

2.5 Updates/Second

Display Orientation

Mounted at 90° increments up to 270° from default orientation

Voltage range

9-36 VDC

Over Range

Display reads 1 on the leftmost digit

Recalibration

Recommended at least every 12 months

Programming method

Four front-mounted rotary control dials are accessed when the cover is removed

Normal mode rejection

60 dB rejection ratio

Operating temperature range

-40 °F to 167 °F (-40 °C to 75 °C)

Storage temperature range

-40 °F to 167 °F (-40 °C to 75 °C)

Relative humidity

0 to 90% non-condensing

Connections

Screw terminals accept 12 to 22 AWG wire

Accuracy

±0.1% of full span ±1 count

Temperature drift

150 PPM/°F from -40 °F to 167 °F (-40 °C to 75 °C) ambient

Calibration range

4 mA input: -1000 to +1000; 20 mA between 20 and 2000 counts greater than 4 mA display. Two-point linear display span

HART Transparency

Analog input will not interfere with existing HART communications on the wired 4-20 mA signal

Enclosure

Explosion-proof die-cast aluminum with glass window, 0.30% max copper content, corrosion-resistant epoxy coating, color: blue. NEMA 4X, IP68.
Two 3/4" NPT threaded conduit openings.
One 3/4" NPT nickel-plated brass conduit plug with 0.03 ft hex key fitting installed.

Mounting

Mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1-1/2" to 2-1/2" or DN 0.13 ft to 0.21 ft pipe mounting

Weight

5.00 lbs (80 oz, 2.27 kg)

Dimensions

5.65″ x 5.25″ x 4.86″ (0.47 ft x 0.43 ft x 0.40 ft) (W x H x D)

Maximum Voltage drop

1 VDC at 20 mA without backlight; 4 VDC at 20 mA with loop-powered backlight.

Input Overload

Over current protection to 2 A max

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Input range

4-20 mA

Display update rate

2.5 Updates/Second

Display Orientation

Mounted at 90° increments up to 270° from default orientation

Voltage range

9-36 VDC

Over Range

Display reads 1 on the leftmost digit

Recalibration

Recommended at least every 12 months

Programming method

Four front-mounted rotary control dials are accessed when the cover is removed

Normal mode rejection

60 dB rejection ratio

Operating temperature range

-40 °F to 167 °F (-40 °C to 75 °C)

Storage temperature range

-40 °F to 167 °F (-40 °C to 75 °C)

Relative humidity

0 to 90% non-condensing

Connections

Screw terminals accept 12 to 22 AWG wire

Accuracy

±0.1% of full span ±1 count

Temperature drift

150 PPM/°F from -40 °F to 167 °F (-40 °C to 75 °C) ambient

Calibration range

4 mA input: -1000 to +1000; 20 mA between 20 and 2000 counts greater than 4 mA display. Two-point linear display span

HART Transparency

Analog input will not interfere with existing HART communications on the wired 4-20 mA signal

Enclosure

Explosion-proof die-cast aluminum with glass window, 0.30% max copper content, corrosion-resistant epoxy coating, color: blue. NEMA 4X, IP68.
Two 3/4" NPT threaded conduit openings.
One 3/4" NPT nickel-plated brass conduit plug with 0.03 ft hex key fitting installed.

Mounting

Mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1-1/2" to 2-1/2" or DN 0.13 ft to 0.21 ft pipe mounting

Weight

5.00 lbs (80 oz, 2.27 kg)

Dimensions

5.65″ x 5.25″ x 4.86″ (0.47 ft x 0.43 ft x 0.40 ft) (W x H x D)

Maximum Voltage drop

1 VDC at 20 mA without backlight; 4 VDC at 20 mA with loop-powered backlight.

Input Overload

Over current protection to 2 A max

Return and Warranty

Please note that return requests for Tek-Trol items must be submitted within 14 days after the delivery date.