Tek-Trol, 1610D-015-A-01-G-05-A-XX-D-A-01, 1/2" Integral Orifice Assembly
Features:
- Very high accuracy when equipped with associated piping.
- Can be used with any differential pressure transmitter having standard process connections.
- The transmitter can be either integrally coupled or remotely connected.
- A 3-Valve Manifold is recommended for mounting between the Model TEK-DP 1610D Integral Orifice Assemblies and transmitter.
- Process-wetted material meets NACE Standard MR-01-75.
- Self-centering orifice plate design.
- No-flow-through transmitter body.
- Orifice plate manufacture consistent with ASME, ISO, and AGA-3 standards
Construction:
Convenient Sizing
The Model TEK-DP 1610D Integral Orifice Assemblies are suitable for liquid, gas, and steam applications.
Handles Wide Ranges of Flow Rates
The flow rate ranges handled by these TEK-DP 1610D Integral Orifice Assemblies (Each range depends onthe specific combination of assembly size and orifice bore) are those frequently found in chemical andpetrochemical plants, research projects, and high-accuracy metering applications.
Highly Accurate Measurements
The orifice assembly can be supplied with associated piping welded to it. This piping can have a variety ofend connections (For installation into the user's process piping). All essential parts are bored to assure aprecise inside diameter which is highly concentric with the orifice bore. This permits a Beta ratio (ratio oforifice bore to pipe ID) that is tightly controlled. The results are measurements that are far more accuratethan could otherwise be obtained.
Simplified Installation
The TEK-DP 1610D Integral Orifice Assemblies become part of the process piping. The transmitter isbolted directly onto the orifice assembly; thus, no transmitter piping is required. The transmitter can be isolated or bypassed by the addition of a three-valve bypass manifold. This permits the zeroing, calibration check, and maintenance of the transmitter without either interrupting the flow or removing the TEK-DP 1610D Integral Orifice Assemblies from the process line. Both the bypass manifold and the transmitter are bolted together as a unit, and the pair is mounted directly onto the orifice assembly.
