| Detection system | - Near infrared pulsed beam interruption system
- (TR-RE 4 beam simultaneous interruption)
|
| Infrared beam | Single modulation pulsed beam by LED (near infrared beam light-emitting diode) |
| Protection distance | Outdoor 330ft (100m) or less |
| Beam power setting | 330ft (100m) / 245ft (75m) / 165ft (50m) / 82ft (25m) |
| Max. arrival distance | |
| Response time | 0.05 sec, 0.10 sec, 0.25 sec, 0.5 sec |
| Modulated beam frequency selection | 4-channels |
| Power supply voltage | 3.6VDC (recommended battery: SAFT lithium thionyl chloride battery LS33600) |
| Current Consumption | - 750μA
- Transmitter: Approx. 430μA (during protection)
- Receiver: Approx. 320μA (during protection)
- (normal temperature, 3.6V DC)
|
| Alarm Output (Receiver only) | - Dry contact relay output form C
- 30V DC 0.1A (resistive load)
|
| Environment Output (Receiver only) | - Dry contact relay output form C
- 30V DC 0.1A (resistive load)
|
| Low Battery Output (Transmitter and Receiver) | - Dry contact relay (N.C.)
- 30V DC 0.1A (resistive load)
|
| Power Output (Transmitter and Receiver) | 3.0V DC 50mA MAX |
| Beam adjustment | Horizontal: ±90°, Vertical: ±20° |
| Alarm LED | Red LED (Receiver) ON: when an alarm is initiated |
| Attenuation LED | Red LED (Receiver) ON: when an alarm is initiated |
| Ambient temperature range | -10°C to +50°C (14°F to 122°F) |
| Functions | - Sound check
- Monitor jack
- Upper/lower beam switch
- Low battery indication
- Wireless alignment checker connection
- Battery saving
- Repeat output
- Battery sharing
|
| Mounting position | Outdoor, Indoor |
| Weight | - Transmitter: Sensor Unit 17.5oz (500g) ,Base 21.7oz (620g) excluding batteries
- Receiver: Sensor Unit 17.5oz (550g) ,Base 21.7oz (620g) excluding batteries
|
| Appearance | Sensor unit: PC/ABS resin, Base: ASA resin Black |
