Buy TAKEX PXB-100SW, Detector 300'/660' Low Current Draw Intelligent DBL

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Features:

4 x synchronised high power beams
low-Current Consumption for battery or solar operation
4 selectable beam channels to prevent crosstalk
double modulation for unsurpassed light immunity
increased beam separation minimises nuisance alarms
vivid internal colour aids beam alignment procedure
lightning and surge protection up to 15kV
environmental monitoring circuit
dynamic auto-gain lock (AGL)
50,000 lux sunlight immunity
IP65 housing

Ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.

For more information, please see Data Sheet

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Optional Accessories

Reviews

Subject to the use of all the optional accessories

Detection system

Near infrared pulsed beam interruption system
(TX-RX 4 beam simultaneous interruption)

Infrared beam

Double modulation pulsed beam by LED

Protection distance

Outdoor 100m (330ft) or less
Indoor 200m (660ft) or less

Max. beam range

Outdoor 1000m (3300ft) or less
Indoor 1000m (3300ft) or less

Response time

0.05 sec. to 0.7 sec. (Variable at pot)

Power supply

5 to 30VDC (polarity)

Alarm output

Dry contact relay output form N.O./N.C switchable
Contact action : Interruption time (min. 2 sec)
Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor

Environmental output

Dry contact relay output form N.O./N.C. switchable
Action : activated when weather condition worsens
Capacity : 30V (AC/DC) 1A (resistive load) Protective resistor

Tamper output

Dry contact relay (N.C.)
Action : activated when cover is detached
Capacity : 30V (AC/DC) 0.1A (resistive load) Protective resistor

Alarm LED

Red LED (Receiver) ON : when an alarm is initiated

Attenuation LED

Red LED (Receiver) ON : when beam is attenuated

Ambient temperature range

-35°C to +66°C (-31°F to +151°F)

Beam Adjustment

Horizontal : ±90° / Vertical : ±20°

Functions

Modulated beam frequency selection
Tone indicator
Environmental module
Beam power selection
Transmitting power adjustment
Alarm output selection
Environmental output selection
Monitor jack
Tamper
Response time adjustment
Upper / Lower beam switch
Wireless Checker

Mounting positions

Outdoor, Indoor

IP rating

IP65

Wiring

Terminals

Weight

Transmitter : 1500g (52.5oz)
Receiver : 1550g (54.3oz)

Appearance

PC resin (wine red)

Product Details

Subject to the use of all the optional accessories

Detection system

Near infrared pulsed beam interruption system
(TX-RX 4 beam simultaneous interruption)

Infrared beam

Double modulation pulsed beam by LED

Protection distance

Outdoor 100m (330ft) or less
Indoor 200m (660ft) or less

Max. beam range

Outdoor 1000m (3300ft) or less
Indoor 1000m (3300ft) or less

Response time

0.05 sec. to 0.7 sec. (Variable at pot)

Power supply

5 to 30VDC (polarity)

Alarm output

Dry contact relay output form N.O./N.C switchable
Contact action : Interruption time (min. 2 sec)
Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor

Environmental output

Dry contact relay output form N.O./N.C. switchable
Action : activated when weather condition worsens
Capacity : 30V (AC/DC) 1A (resistive load) Protective resistor

Tamper output

Dry contact relay (N.C.)
Action : activated when cover is detached
Capacity : 30V (AC/DC) 0.1A (resistive load) Protective resistor

Alarm LED

Red LED (Receiver) ON : when an alarm is initiated

Attenuation LED

Red LED (Receiver) ON : when beam is attenuated

Ambient temperature range

-35°C to +66°C (-31°F to +151°F)

Beam Adjustment

Horizontal : ±90° / Vertical : ±20°

Functions

Modulated beam frequency selection
Tone indicator
Environmental module
Beam power selection
Transmitting power adjustment
Alarm output selection
Environmental output selection
Monitor jack
Tamper
Response time adjustment
Upper / Lower beam switch
Wireless Checker

Mounting positions

Outdoor, Indoor

IP rating

IP65

Wiring

Terminals

Weight

Transmitter : 1500g (52.5oz)
Receiver : 1550g (54.3oz)

Appearance

PC resin (wine red)

Optional Accessories

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

TAKEX PXB-100SW Detector 300'/660' Low Current Draw Intelligent DBL

Identifiers

Technical Details

Optional Accessories

Reviews