Buy TAKEX INT-QUADIP, IP Interface PoE Module

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Features:

high sensitivity ultraviolet flame sensor + wide angle intrusion PIR
dual output modes; AND/OR
forced output mode following continued flame detection
Alarm memory function
Multi-zone PIR technology provides pet immunity up to 20kg (40lbs)
PIR area adjustment
Detection timer

A combination UV flame sensor and wide-angle PIR with up to 10m flame and intrusion detection for safer indoor protection of your premises.

For more information, please see Data Sheet

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for TAKEX items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Detection system

Ultraviolet rays detection (185~260nm)

Detection distance

10m (33ft) max. from 7cm (2.75") flame

Detection area angle

Approx. 120 degrees conically

Detection setting

Detection timer (1sec, 3sec)
Detection sensitivity (H: 100%, L: 50%)

Alarm LED (RED)

Part of flame sensor
Lighting at alarm (detection time + off delay Approx. 2 sec.)
Blinking (3 min) and Lighting (47 min) at memory

Detection system

Passive Infrared

Detection area

Wide Angle 10m (33ft) Max. 29 pairs

Detection area angle adjustment

3 steps

Alarm LED (RED)

Part of passive sensor
Lighting at alarm (one shot, Approx. 2 sec.)
Blinking (3 min) and Lighting (47 min) at memory
Lighting at trouble.

Power supply

10-30VDC (non-polarity)

Current Consumption

20mA Max.

Alarm output

Flame sensor output (From alarm terminal 1)
Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
Contact operation: Detection time + off delay.(Approx.2sec.)
Contact capacity :30V (AC/DC) 0.25AMax.(resistive load) Passive sensor output (From alarm terminal 2)
Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
Contact operation: One shot (Approx. 2 sec.)
Contact capacity: 30V(AC/DC) 0.25AMax.(resistive load) AND mode Alarm signal outputs from alarm terminal 1, 2, when both sensors detect during the selected time.
Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
Contact operation: Min. 2 sec. (Max. depends on AND mode timer setting)
Contact capacity: 30V (AC/DC) 0.25A Max.(resistive load)

Tamper output

Dry contact relay NC
(Activated when the front cover is detached)
Contact capacity: 30V (AC/DC) 0.1A Max. (resistive load)

Alarm memory

Reset after blinking (3 min) and lighting (47 min)

Ambient temperature range

-15°C to +55°C (5°F to +131°F) without condensation

Mounting position

Indoor wall surface

Connections

Self-up terminal

Weight

Approx. 120g

Appearance

Resin

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Detection system

Ultraviolet rays detection (185~260nm)

Detection distance

10m (33ft) max. from 7cm (2.75") flame

Detection area angle

Approx. 120 degrees conically

Detection setting

Detection timer (1sec, 3sec)
Detection sensitivity (H: 100%, L: 50%)

Alarm LED (RED)

Part of flame sensor
Lighting at alarm (detection time + off delay Approx. 2 sec.)
Blinking (3 min) and Lighting (47 min) at memory

Detection system

Passive Infrared

Detection area

Wide Angle 10m (33ft) Max. 29 pairs

Detection area angle adjustment

3 steps

Alarm LED (RED)

Part of passive sensor
Lighting at alarm (one shot, Approx. 2 sec.)
Blinking (3 min) and Lighting (47 min) at memory
Lighting at trouble.

Power supply

10-30VDC (non-polarity)

Current Consumption

20mA Max.

Alarm output

Flame sensor output (From alarm terminal 1)
Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
Contact operation: Detection time + off delay.(Approx.2sec.)
Contact capacity :30V (AC/DC) 0.25AMax.(resistive load) Passive sensor output (From alarm terminal 2)
Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
Contact operation: One shot (Approx. 2 sec.)
Contact capacity: 30V(AC/DC) 0.25AMax.(resistive load) AND mode Alarm signal outputs from alarm terminal 1, 2, when both sensors detect during the selected time.
Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
Contact operation: Min. 2 sec. (Max. depends on AND mode timer setting)
Contact capacity: 30V (AC/DC) 0.25A Max.(resistive load)

Tamper output