Socomec 38512038 Fuserbloc Fusible Discon Switch 400A 2 Poles UL Fuse

Socomec, 38512038, Fuserbloc Fusible Discon Switch Ext&Dir F/L R OP-400A-2P-UL-Fuse J

Features:

• Improved safety
• High breaking capacity
• Multi-use
• Simplified use
• Accepts Class CC, J and L fuses
• Very high short circuit protection, up to 200 kAIC
• Used of glass fiber renforced polyester for both high mechanical and thermal resistance
• Make and break under load conditions to provide safety of person and equipment
• Large range of connection accessories and mounting brackets for quick and easy installation
• Double breaking per pole (top and bottom) providing extra protection

Applications:

• Data centre
• Healthcare
• Industry
• Building

Compliance with standards:

• UL489, Guide WJAZ File E255272 (Frame size 1 and 2)
• UL98, Guide WHTY File E201138 (Frame sizes 3 to 8)
• CSA22.2 #5, Class 4652-06 File 112964 (Frame size 1 and 2)
• CSA22.2 #4, Class 4651-02 File 112964 (Frame sizes 3 to 8)
• IEC 60947-3

Fuserbloc fusible disconnect switch is heavy duty switch that make and break power circuits on and off load. The switch employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the "OFF" position. This switch is extremely durable and is tested and approved for use in the most demanding applications.

Fuserbloc UL unit is manually-operated multipole fuse load break switch with external right front-side operation and comply with UL and CSA standards.It provides make and break on load and safety isolation and protection against overcurrent for any low voltage electrical circuit. The switch use double-pole isolator contacts to ensure complete isolation of the fuse when the switch is in the "OFF" position. This device is suitable for use as disconnector for motors and industrial control panels on service entrance equipment, final panelboards, distribution switchboards, industrial control equipment or motor control centres.This range is comes in right front-side, direct or external control, in 2 poles and up to 400 A.

Advantages:

Improved safety

The double phase isolator (up stream down stream of the fuse) and fully visible isolation guarantee the safety of people and equipment against overcurrents.

High breaking capacity

High breaking capacity fuses (200 kA rms) provide protection against overloads and shortcircuits.

Multi-use

The device can be equipped with a "Flange" type front or side operation handles, fitted directly on the product or externally, with the possibility of installing it on the door or the side of the electrical box or cabinet.

Simplified use

The Test position enables testing of the control circuits without turning on the power thanks to the use of U-type auxiliary contacts. In the Test position, the cabinet door can be opened.

For more information, please see Data Sheet