SIIG, CE-H27911-S1, 1x2 4K 60Hz HDMI Splitter Over Cat6 Extender with Loopout, IR, ARC & RS-232 - Up to 230ft (70m) - Near Zero Latency
CE-H27911-S1 Includes Only:
- 1x 1x2 HDMI Splitter Over Cat6 Extender with Loopout, IR, ARC & RS-232
- 1x 3.5mm IR emitter extension cable
- 2x 3.5mm IR receiver extension cable
- 1x DC power adapter, 12V/2A (for TX)
- 2x DC power adapter, 5V/2A (for RX)
- 1x RS-232 terminal block
- 1x Mounting kits
- 1x User Reference Guide
Features:
- 4K UHD Resolution
- Supports Ultra high-definition video resolution up to 4K (3840x2160) at 60Hz, HDR, HDCP 2.2, YUV 4:4:4 to deliver a crystal-clear picture quality
- Allows EDID management via DIP switch to control remote/local displays resolution and RS-232 command control the device
- Extend Distance
- This 1x2 HDMI Splitter Over Cat6 Extender with Loopout designed to extend/splits HDMI signals up to 230ft (70m) through RJ45 network to two remote HDMI displays for reliability transmission
- HDMI loop-out on the transmitter to connect a local display for monitoring of the extended displays
- IR Extension
- Bi-directional IR remote control through Cat6/7 cable allows you to control the HDMI source device at the remote display location (IR blaster/receiver cables are included)
- Note:Please make sure the remote control is within the effective range
- Audio Extraction
- Easily extract audio via audio slid switch to select S/PDIF (Toslink) or ARC (Audio Return Channel) to return audio used to TV to the audio system/speaker
- S/PDIF audio formats:PCM 2.0, Dolby 5.1, and DTS 5.1;
- HDMI audio formats:PCM 2.0/5.1/7.1, Dolby 5.1, and DTS 5.1
- Multiple Connectivity Ports
- Comes with one HDMI video input port, one HDMI video loop-out port, two HDMI video output ports, four RJ45 network ports, three 3.5mm IR emitter ports, three 3.5mm IR receiver ports, two S/PDIF ports, one RS-232 terminal block, one DIP switch, three reset buttons, two audio slide switches, one DC power jack (12V/2A) for TX, two DC power jacks (5V/2A) for RXs
- Maximum Compatibility
- Supports Plug-n-play. No driver installation required. The reset button allows displays to be re-detected if no displays are detected
- Protection Components
- Supports ESD protection, lightning protection, and surge protection to safe your electronic equipment
- Metal Housing Design
- Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life
Applications:
- Lecture hall
- Exhibition
- Retail store
- Shopping center
- Restaurant
- Transportation
- Church
- Broadcast
- Educational facilities
- Show room
- Library
HDMI 1x2 Extender/Splitter, Extends 4K at 60Hz HDMI signal to 2 displays up to 230ft (70m) over Cat6 cable, HDMI Loopout, IR Control, ARC, RS-232, Metal Housing, Wall mount design.
Dimensions:
