Buy Sensaphone FGD-0223-1, 1" Thermal Flow Meter with Digital Display

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

The Sensaphone Dual Flow and Temperature Sensor will measure and provide real time flow rates to any Sensaphone that accepts a 4-20mA signal. When the flow rate falls outside of the Sensaphone's programmed high or low limit, the user will receive an alarm which displays or reads the current flow rate. The sensor can be used to detect and measure the flow of oil, water, glycol and air in internal pipe diameters up to 10". A simple pushbutton menu allows the sensor to be programmed to fit your application setpoints. Switching, frequency or analog outputs are also selectable. Designed with an integrated digital display, values may be set in green or red for indicating if process values are within range or if limits have been exceeded. A 24V DC power supply is required to power the sensor.

Features with all optional accessories:

Measures flow rates (ft/s) from .15 to 9.85 (liquid) and 6 to 328 (gases)
Included 7' cable can be extended with optional accessory wire
Fast response time and integrated temperature measurement
Set high and low limits by programming the Sensaphone
Sensaphone will go into alarm when flow rate exceeds limit

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Sensaphone items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Media	water, glycol solutions, air, oils
Operating Voltage	18 to 30 DC
Probe Length	1" \| 26.6mm (.5" to 4" pipe) 4" \| 100mm (3.5" to 10" pipe)
Total Number of Outputs	2
Output Signal	Analog Signal
Analog Current Output	4-20mA (scalable)
Liquid Flow Measuring Range	.15 to 9.85 ft/s
Gas Flow Measuring Range	6 to 328 ft/s
Temperature Monitoring	4" Probe: 39 to 212F 1" Probe: 4 to 194F
Operating Temperature Range	-40 to 176F
Protection	IP 65; IP 67
Display	6x LED, green
Fitting	1/2 NPT
Flow Accuracy	7% of measured value + 2% of range. Accuracy figure for water temperature at 68 to 158F and inlet length of 5'
Temperature Accuracy (Water)	±0.5F (0.3C) for flow velocity between 1 ft/s and 9.85 ft/s
Temperature Accuracy (Air)	± 1.8F (1.0C) for flow velocity greater then 32.8 ft/s

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Media	water, glycol solutions, air, oils
Operating Voltage	18 to 30 DC
Probe Length	1" \| 26.6mm (.5" to 4" pipe) 4" \| 100mm (3.5" to 10" pipe)
Total Number of Outputs	2
Output Signal	Analog Signal
Analog Current Output	4-20mA (scalable)
Liquid Flow Measuring Range	.15 to 9.85 ft/s
Gas Flow Measuring Range	6 to 328 ft/s
Temperature Monitoring	4" Probe: 39 to 212F 1" Probe: 4 to 194F
Operating Temperature Range	-40 to 176F
Protection	IP 65; IP 67
Display	6x LED, green
Fitting	1/2 NPT
Flow Accuracy	7% of measured value + 2% of range. Accuracy figure for water temperature at 68 to 158F and inlet length of 5'
Temperature Accuracy (Water)	±0.5F (0.3C) for flow velocity between 1 ft/s and 9.85 ft/s
Temperature Accuracy (Air)	± 1.8F (1.0C) for flow velocity greater then 32.8 ft/s

Return and Warranty

Please note that return requests for Sensaphone items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Sensaphone FGD-0223-1 1" Thermal Flow Meter with Digital Display

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews