RuB EA3D134H41 s.134 1-1/2" FIPxFIP Stainless Valve Actuation Kit

RuB, EA3D134H41, s.134 1-1/2" FIPxFIP Full Port Stainless Steel Ball Valve Double Acting Actuation Kit

EA3D134H41 Includes Only:

• s.134 FIPxFIP Full Port Stainless Steel Ball Valve 1-1/2"
• EA4-3 Double Acting Actuation

Features:

• Quality
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • Silicone-free lubricant on all seals
  • NACE compliance MR-01-75
• Body
  • Designed and tested for ANSI B16.34
  • CF8M stainless steel housing
• Stem
  • Blowout-proof stem
• Sealing
  • Reinforced PTFE seats
• Threads
  • NPT taper ANSI B.1.20.1 female by female threads
• Flow
  • 100% full port for maximum flow
• Handle
  • AISI 316 stainless trim
  • Convertible for manual or actuated operation
  • ISO 5211 actuator mounting pad allows direct mounting of RuB electric and pneumatic actuators, with no bracket or coupling required.
• Working pressure & temperature
  • 1000 PSI cold working pressure
  • 150 PSI WSP steam rating
  • 2x10-2 torr vacuum rating
  • *150 psig non-shock working steam pressure. Not suitable for throttling steam.
  • -50°F to +450°F (-45°C to +232 °C)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
• Approved by or in compliance with
  • GOST-R (Russia)

NOTE: approvals apply to specific configurations/sizes only.

Features of Pneumatic Actuator:

• ISO 5211 direct mount on valve
• Indoor or outdoor installation
• Pilot ring for perfect alignment of shaft and stem
• Nickel-plated steel shaft
• Stainless steel fasteners
• High tensile long life return springs
• Visual position indicator
• Fast field conversion between double acting and spring return, fail open or fail closed
• The minimum ambient temperature while the actuator is at rest: -31°F (-35°C)
• NAMUR pads for direct mount of solenoid and limit switch
• Extruded aluminum body hard anodized cylinder bore rock hard and glass smooth