PIE 820ELITE Multifunction Diagnostic Calibrator

Practical Instrument Electronics, Practical Instrument Electronics 820ELITE, Multifunction Diagnostic Calibrator, Loop Diagnostics

Practical Instrument Electronics 820ELITE Includes Only:

• Four"AA" Alkaline batteries
• Certificate of Calibration Dark Blue Rubber Boot
• Evolution Hands-Free Carrying Case Part
• Practical Instrument Electronics Multifunction Wire Kit
• 1 Red and 1 Black Lead with Banana Plug and Alligator Clips
• 2 Red & 2 Black Leads with Banana Plugs & Spade Lugs

Features:

• Lighten up your toolbox. Compact calibrator replaces toolbox of single-function devices
• Technician-friendly operation. The intuitive EZ-DIAL double cli-ck menu makes it easier to set up than other multifunction calibrators. Uses the same menus as the single function Practical Instrument Electronics Evolution calibrators. Icons on the display indicate where to plug in the test leads.
• Use it as a milliamp and voltage calibrator:
  • Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV
  • Read to 24.00 mA, 0.0 to 60.0 VDC, +/- 99.999 mV and +/- 999.99 mV
  • Simulate 2 Wire transmitters
  • Power up transmitters and loops with built-in 24 V power supply
  • Simplify HART hookups with a built-in 250-ohm resistor
• Troubleshoot Loop problems. Quickly diagnose ground fault and current leakage with patented loop diagnostic technology
• Calibrate directly in temperature (°C and °F):
  • The Practical Instrument Electronics 820Elite works with the instruments you use.
  • Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN), and P(Platinel II)
  • RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
  • Copper 10 and 50 Ohm, Nickel 110 and 120 Ohm
• Checkout flow and vibration systems:
  • Source and read frequency to 2000 CPM (Counts-Per-Minute), 999.99
  • Hz, 9999.9 Hz, & to 20.000 kHz
• Troubleshoot loop & wiring problems. Beep out connections with the built-in continuity checker
• Simulate pH probes into transmitters and analyzers. Source from 0.000 to 14.000 pH at 25°C (77°F) corresponding to +414.12 to -414.12 mV
• Measure pressure with optional pressure modules. 32 modules for gauge, differential, compound, and absolute pressure
• Easy to read. Turn on the backlight and easily see the display in dark areas of the plant.
• Quickly set any three outputs plus automatic stepping andamp; ramping:
  • Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch.
  • Choose between 2, 3, 5, and 11 steps to automatically increment the output in 100%, 50%, 25%, or 10% of span.
  • Select RAMP to smoothly increase and decrease the output between Zero and Span.
  • Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30, and 60 seconds
• Measure temperature sensors, frequency pickups, loop currents, voltage levels, and pressures. Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability