PCE Instruments PCE-DFG N 50TW Force Gauge, 0 to 50 Nm

PCE-DFG N 50TW Includes Only:

• 1 x Torque meter PCE-DFG N 50TW
• 1 x Torque transducer 50 Nm
• 1 x 1.5 m / 4.9 ft sensor cable
• 1 x PC software
• 1 x USB data cable
• 1 x Power supply
• 1 x Carrying case
• 1 x Sensor screw socket
• 1 x Instruction manual

Features:

• Left / right torsion measurement
• 1600 Hz sampling rate
• Error limit 0.5% of the measuring range
• PEAK / Hold function
• Graphic display
• PC software

The torque wrench tester consists of a handheld measuring device and an external torque transducer. The torsion transducer is connected to the hand-held device via a 1.5 m / 4.9 ft long cable and thus enables installation in a test stand or direct assembly on a test bench. The torque measuring device is delivered adjusted so that the control measurements can be started immediately. This certificate is a target / actual comparison on a traceable reference standard and thus serves as proof of the measurement accuracy. The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range. The torque measuring device is therefore used as a reference device for testing and adjusting static torque tools. A screw latch is essential for dynamic torques. The torque transducer has a 1/2" square socket and can perform the torsion measurements in both directions of rotation. With a sampling rate of 1600 Hz, the torque meter reliably detects the first and the maximum torsional moment peak (PEAK). The release moment (" cli-ck ") is shown separately in the display and can be deleted either manually or automatically after a set time has elapsed. Thanks to freely adjustable alarm values, the torque measuring device can warn the tester of the overload of the torque tool if it does not trigger itself. For a more detailed analysis of the torsional forces.

Dimensions: