PCE Instruments PCE-830-1 Three-Phase Power Meter, Data Logger, 100 A

PCE-830-1 Includes Only:

• 1 x PCE-830 Clamp Meter
• 3 x Amp clamps - PCE-6801
• 4 x Alligator clips
• 4 x Safety test lines (3 m / 3.3 ft long),
• 8 x Batteries
• 1 x Mains adaptor
• 1 x Carrying case
• 1 x USB cable software
• 1 x User's manual

Features:

• Analysis of a network of 3 phases / 4 conductors, 3 phases / 3 conductors, 1 phase / 2 conductors, 1 phase / 3 conductors
• Indicates current waveforms and voltage overlap.
• 512 KB of memory with programmable intervals to save data every 2 to 3000 seconds, 17,470 readings using the system of 3 phases / 4 conductors
• Indicates waveforms, efficiency parameters, and harmonic distortion
• Backlit LCD with dot-matrix
• Average power (AD in W, KW, MW)
• Maximum power (MD in W, KW, MW) with the programmable period
• Analysis of harmonic distortion up to curvature of 99
• Indication of up to 50° form of harmonic wave
• Indication of the waveform with maximum value (1024 readings/period)
• Analysis of absolute distortion (%THD-F)
• Diagram of graphic equilibrium with parameters of a 3 phase system
• Detects up to 28 transistors (time and cycles) with a programmable threshold (%)
• Relation of 3 phases of voltage or asymmetrical current (VUR)
• The factor of 3 phases of voltage and asymmetrical current (d0%, d2%)
• USB port
• Integrated timer and calendar to record data

The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetries. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The backlit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Clamp Meter. In data logger mode, it can save up to 17,470 readings (3 phases / 4 conductors), in a simpler setup (1 phase / 2 conductors) it can save up to 52,400 readings, split into 85 groups. All this makes the PCE-830 Clamp Meter the ideal instrument for taking measurements over long durations. Measurement values obtained can be sent to a computer and processed with the included analysis software. The device comes with everything needed to be measured and analyzed from the moment it arrives.