NTI st-fo4k18gb-rsla-lcv2 Xtendex 4K HDMI Extender with Stereo Audio

Network Technologies Incorporated, st-fo4k18gb-rsla-lcv2, Xtendex 4K 18Gbps HDMI Extender with Stereo Audio and Local Access via One LC Singlemode or Multimode Fiber Optic Cable

st-fo4k18gb-rsla-lcv2 Includes Only:

• One transmitter unit with fiber transmitter module installed
• One receiver unit with fiber receiver module installed
• Two IR emitters
• Two IR receivers
• Two AC Adapters- 100 to 240 VAC at 50 or 60Hz; DC 5V, 1A
• Power supply plugs
• Two 3-screw terminal blocks for RS232
• URL Slip with path to this manual

Features:

• Signal transmission via single-strand singlemode or multimode LC fiber optic cable.
  • Using singlemode 9-micron cable, extend to 6.21 miles (10 kilometers).
  • Using multimode 50-micron OM3 (or better) cable, extend to 984 feet (300 meters).
• Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 at30/50/60Hz YUV 4:4:4, HDTV resolutions to 1080p at120Hz, and up to 1920x1200 (WUXGA).
• HDMI features supported:
  • HDMI 2.0
  • 8-bit, 10-bit, and 12-bit Deep Color
  • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 2/5.1/7.1CH, DTS 5.1, and DTS:X
  • YUV 4:4:4, 4:2:2, and RGB
  • Bandwidth up to 600 Mhz (18Gbps)
  • 3D (1080p at60Hz)
  • HDR
• HDCP 2.2 and 1.4 compliant.
• Supports local and remote HDMI displays.
• Supports audio embedding and de-embedding.
  • Use the switch on the transmitter to select HDMI digital audio or analog stereo audio source.
    • Simultaneously outputs both HDMI digital audio and analog stereo audio.
    • When HDMI audio is selected, the extender passes the embedded digital audio to the HDMI connector and also converts/de-embeds the digital signal to analog stereo audio.
    • When LINE audio is selected, the extender passes the analog stereo audio to the 3.5mm analog audio connector and also converts/embeds the analog signal to digital audio.
• Bi-directional IR control from input and output locations.
• Support full-duplex RS232 up to 115200 baud.
• Plug-and-play functionality - no software needed.
• Low RFI/EMI for sensitive applications.
• Cables can be installed in conduit prior to extender installation.
• Integrated mounting brackets for easy surface/wall mounting.

The Xtendex® 4K 18Gbps HDMI Extender via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, IR, stereo audio, and RS232 up to 6.21 miles (10 km) away from a 4K HDMI source using a single LC singlemode fiber optic strand and 984 feet (300 meters) using OM3 multimode fiber optic cable. Each extender consists of a transmitter that connects to an HDMI source and a local display via the HDMI loop output, and a receiver that connects to an HDMI display.