Buy NTI e-1w-d, Enviromux Environment Monitoring System

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

NTI, e-1w-d, Enviromux Environment Monitoring System with 1-Wire Sensor Interface, DIN Mounted, One Power Supply included

e-1w-d Includes Only:

1 x Power Supply

The Enviromux Environment Monitoring System (EMS) with 1-Wire Sensor Interface monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via email-to-SMS).

The IoT system supports 24 single reading 1-wire sensors in any combination - temperature, humidity, dew point, or digital inputs - and 2 separate digital inputs. It functions independently or as an IP-connected remote sensor for the E-2D/5D/16D.

Features:

Monitor and manage environmental and security conditions over IP.
Sensors are hot-pluggable.
- The sensors will automatically be detected on power-up or a Detect Devices button on the summary page can be selected when logged into the unit.
Monitors (ping) up to 4 IP network devices - alerts are sent if devices are not responding.
Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
Create multiple alerts for any installed sensor.
Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
- Configure up to 32 alerts, and one Smart Alert.
Supports 4 IP network video cameras for a live view of any facility.
Dual redundant power supplies for connection to two separate power sources.
- The second Power Supply is sold separately.
Available with optional Power over Ethernet (POE).
Integrates with various Open Source SNMP monitoring packages - Nagios
- The unit can be polled via SNMP.
Security: HTTPS, SSLv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
Integrated mounting brackets for easy surface/wall mounting.
- Optional DIN mounting available.
Ideal for a wide range of applications including IT infrastructure monitoring, cold storage/freezer monitoring, or any unmanned area that needs to be monitored.
Use the E-1W(P) with a wireless router and Wi-Fi Range Extender to create a Wireless Environment Monitoring System.
- Configure, monitor, and receive alerts without the use of a wired network connection.

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for NTI items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

RJ11 Sensor Ports

Two RJ11 6P4C jacks for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination.
- Up to 24 temperature sensors (or any single reading 1-wire sensors) can be connected between both RJ11 connectors.
- Up to 8 temperature/humidity/dew point combination 1-wire sensors can be split between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors
- Up to 12 digital input expanders can be split between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each digital input expander is equivalent to 2 single reading sensors
- The maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors.
  - This maximum includes the cable length of each sensor.
- RJ11 splitters or t-tap boards (RJ11-3JCK) for daisy-chaining sensors are sold separately.
  - Sensors can be extended up to 7 feet from an RJ11-3JCK

Dry Contact Closures

Two screw terminal pairs for connecting dry contact devices and liquid detection sensors.

USB Port

One female Micro USB connector - reserved for future use.

Ethernet Port

One female RJ45 connector.
10/100 Base-T Ethernet interface.

Power

E-1W:
- Dual DC power provides dual redundancy.
  - If the first power source fails, the unit will automatically, without interruption, switch over to the second power source.
  - The unit draws power from the source with the highest DC voltage (nominal 5.5V).
  - If both sources have exactly the same voltage, it will draw in part from each of them.
- 100 to 240 VAC at 50 or 60 Hz via AC adapter.
  - Includes one country-specific AC adapter. The second AC adapter is sold separately (PWR-SPLY-ELC).
- Input voltage: 5.5VDC ±5%
- Power consumption: 5W max.
E-1WP:
- Built-in Power over Ethernet and dual DC power provide triple redundancy.
  - Power over Ethernet standards supported: IEEE 802.3af, 802.3at.
    - Proprietary schemes such as Cisco Discovery Protocol are not supported.
      - Similar legacy switches and routers will have to use PWR-SPLY-ELC.
- If the first power source fails, the unit will automatically, without interruption, switch over to the second power source.
- The unit draws power from the source with the highest DC voltage (nominal 5.5V).
- If two or more sources have exactly the same voltage, it will draw in part from each of them.
- 100 to 240 VAC at 50 or 60 Hz via AC adapter (not included).
  - Country-specific AC adapters are sold separately (PWR-SPLY-ELC).
- Input voltage: 5.5VDC ±5%
- Power consumption: 5W max.
Use the PWR-48V-5-5V4A DC-DC power converter to install the E-1W in a 48V or 24V Telecom environment.

Regulatory Approvals

CE, RoHS.
TAA compliant

Dimensions

W x D x H in: 4 x 3.65 x 1.37 (102 x 93 x 35 mm)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

RJ11 Sensor Ports

Two RJ11 6P4C jacks for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination.
- Up to 24 temperature sensors (or any single reading 1-wire sensors) can be connected between both RJ11 connectors.
- Up to 8 temperature/humidity/dew point combination 1-wire sensors can be split between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors
- Up to 12 digital input expanders can be split between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each digital input expander is equivalent to 2 single reading sensors
- The maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors.
  - This maximum includes the cable length of each sensor.
- RJ11 splitters or t-tap boards (RJ11-3JCK) for daisy-chaining sensors are sold separately.
  - Sensors can be extended up to 7 feet from an RJ11-3JCK

Dry Contact Closures

Two screw terminal pairs for connecting dry contact devices and liquid detection sensors.

USB Port

One female Micro USB connector - reserved for future use.

Ethernet Port

One female RJ45 connector.
10/100 Base-T Ethernet interface.

Power

E-1W:
- Dual DC power provides dual redundancy.
  - If the first power source fails, the unit will automatically, without interruption, switch over to the second power source.
  - The unit draws power from the source with the highest DC voltage (nominal 5.5V).
  - If both sources have exactly the same voltage, it will draw in part from each of them.
- 100 to 240 VAC at 50 or 60 Hz via AC adapter.
  - Includes one country-specific AC adapter. The second AC adapter is sold separately (PWR-SPLY-ELC).
- Input voltage: 5.5VDC ±5%
- Power consumption: 5W max.
E-1WP:
- Built-in Power over Ethernet and dual DC power provide triple redundancy.
  - Power over Ethernet standards supported: IEEE 802.3af, 802.3at.
    - Proprietary schemes such as Cisco Discovery Protocol are not supported.
      - Similar legacy switches and routers will have to use PWR-SPLY-ELC.
- If the first power source fails, the unit will automatically, without interruption, switch over to the second power source.
- The unit draws power from the source with the highest DC voltage (nominal 5.5V).
- If two or more sources have exactly the same voltage, it will draw in part from each of them.
- 100 to 240 VAC at 50 or 60 Hz via AC adapter (not included).
  - Country-specific AC adapters are sold separately (PWR-SPLY-ELC).
- Input voltage: 5.5VDC ±5%
- Power consumption: 5W max.
Use the PWR-48V-5-5V4A DC-DC power converter to install the E-1W in a 48V or 24V Telecom environment.

Regulatory Approvals

CE, RoHS.
TAA compliant

Dimensions

W x D x H in: 4 x 3.65 x 1.37 (102 x 93 x 35 mm)

Return and Warranty

Please note that return requests for NTI items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

NTI e-1w-d Enviromux Environment Monitoring System

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews