| Ethernet Interface |
| 10/100BaseT(X) Ports (RJ45 Connector) | - 6
- Auto-negotiation speed
- Full/Half duplex mode
- Auto MDI/MDI-X connection
|
| 100BaseFX Ports (multi-mode ST connector) | 2 |
| Standards | - IEEE 802.3 for 10BaseT
- IEEE 802.3u for 100BaseT(X) and 100BaseFX
- IEEE 802.3x for flow control
- IEEE 802.1D-2004 for Spanning Tree Protocol
- IEEE 802.1p for Class of Service
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1w for Rapid Spanning Tree Protocol
|
| Ethernet Software Features |
| Filter | 802.1Q VLAN, GMRP, GVRP, IGMP v1/v2, Port-based VLAN |
| Industrial Protocols | EtherNet/IP, Modbus TCP |
| Management | Back Pressure Flow Control, BOOTP, DHCP Option 66/67/82, DHCP Server/Client, Flow control, IPv4/IPv6, LLDP, Port Mirror, RARP, RMON, SMTP, SNMP Inform, SNMPv1/v2c/v3, Syslog, Telnet, TFTP |
| MIB | Bridge MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9, RSTP MIB |
| Redundancy Protocols | RSTP, STP, Turbo Chain, Turbo Ring v1/v2 |
| Time Management | NTP Server/Client, SNTP |
| Switch Properties |
| IGMP Groups | 256 |
| MAC Table Size | 8 K |
| Maximum Number of VLANs | 64 |
| Packet Buffer Size | 1 Mbits |
| Priority Queues | 4 |
| VLAN ID Range | VID 1 to 4094 |
| Serial Interface |
| Console Port | RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1) |
| DIP Switch Configuration |
| Ethernet Interface | Turbo Ring, Master, Coupler, Reserve |
| Input/Output Interface |
| Alarm Contact Channels | Relay output with current carrying capacity of 1 A at 24 VDC |
| Power Parameters |
| Connection | 1 removable 6-contact terminal block(s) |
| Input Voltage | 12/24/48 VDC, Redundant dual inputs |
| Operating Voltage | 9.6 to 60 VDC |
| Input Current | - 0.61 at 12 VDC
- 0.3 at 24 VDC
- 0.16 at 48 VDC
|
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
| Physical Characteristics |
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Weight | 650 g (1.44 lb) |
| Installation | DIN-rail mounting, Wall mounting |
| Environmental Limits |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Standards and Certifications |
| Safety | EN 60950-1, UL 508, UL 60950-1 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | - IEC 61000-4-2 ESD: Contact: 6 kV
- Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
- IEC 61000-4-4 EFT: Power: 2 kV
- Signal: 2 kV
- IEC 61000-4-5 Surge: Power: 2 kV
- Signal: 2 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8 PFMF
|
| Hazardous Locations | ATEX, Class I Division 2, IECEx |
| Maritime | NK, DNV |
| Railway | EN 50121-4 |
| Traffic Control | NEMA TS2 |
| Freefall | IEC 60068-2-31 |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| MTBF |
| Time | 1,253,072 hrs |
| Standards | Telcordia (Bellcore), GB |
