Ethernet Interface |
10/100BaseT(X) Ports (RJ45 Connector) | - 8
- Auto-negotiation speed
- Full/Half duplex mode
- Auto MDI/MDI-X connection
|
Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP) | 4 |
Standards | - IEEE 802.3 for 10BaseT
- IEEE 802.3u for 100BaseT(X) and 100BaseFX
- IEEE 802.3ab for 1000BaseT(X)
- IEEE 802.3z for 1000BaseX
- IEEE 802.3x for flow control
- IEEE 802.3ad for Port Trunk with LACP
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1D-2004 for Spanning Tree Protocol
- IEEE 802.1w for Rapid Spanning Tree Protocol
- IEEE 802.1p for Class of Service
- IEEE 802.1X for authentication
|
Ethernet Software Features |
Filter | - GMRP
- GVRP
- GARP
- 802.1Q VLAN
- IGMP Snooping v1/v2/v3
- IGMP Querier
|
Management | - IPv4/IPv6
- Flow control
- Back Pressure Flow Control
- DHCP Server/Client
- ARP
- RARP
- LLDP
- Port Mirror
- Linkup Delay
- SMTP
- SNMP Trap
- SNMP Inform
- SNMPv1/v2c/v3
- RMON
- TFTP
- SFTP
- HTTP
- HTTPS
- Telnet
- Syslog
- Private MIB
|
MIB | - P-BRIDGE MIB
- Q-BRIDGE MIB
- IEEE8021-SPANNING-TREE-MIB
- IEEE8021-PAE-MIB
- IEEE8023-LAG-MIB
- LLDP-EXT-DOT1-MIB
- LLDP-EXT-DOT3-MIB
- SNMPv2-MIB
- RMON MIB Groups 1, 2, 3, 9
|
Redundancy Protocols | - STP
- RSTP
- Turbo Ring v2xTurbo Chain
- Ring Coupling
- Dual-Homing
- Link Aggregation
- MSTP
|
Security | - Broadcast storm protection
- Rate Limit
- Trust access control
- Static Port Lock
- MAC Sticky
- HTTPS/SSL
- SSH
- RADIUS
- TACACS+
- Login and Password Policy
- Access control list
|
Time Management | - SNTP
- NTP Server/Client
- NTP Authentication
|
Protocols | - IPv4/IPv6
- TCP/IP
- UDP
- ICMP
- ARP
- RARP
- TFTP
- DNS
- NTP Client
- DHCP Server
- DHCP Client
- 802.1X
- QoS
- HTTPS
- HTTP
- Telnet
- SMTP
- SNMPv1/v2c/v3
- RMON
- Syslog
|
Switch Properties |
MAC Table Size | 16 K |
Jumbo Frame Size | 9.216 KB |
Maximum Number of VLANs | 256 |
VLAN ID Range | VID 1 to 4094 |
IGMP Groups | 512 |
Priority Queues | 4 |
Packet Buffer Size | 1 MB |
LED Interface |
LED Indicators | PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC |
Serial Interface |
Console Port | RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) |
USB Interface |
USB Connector | USB Type A (Reserved) |
Input/Output Interface |
Alarm Contact Channels | 1, Relay output with the current carrying capacity of 1 A at 24 VDC |
Digital Input Channels | 1 |
Digital Inputs | - +13 to +30 V for state 1
- -30 to +3 V for state 0
- Maximum input current: 8 mA
|
Buttons | Reset button |
DIP Switch Configuration |
DIP Switches | Turbo Ring, Master, Coupler, Reserve |
Power Parameters |
Connection | 2 removable 4-contact terminal block(s) |
Pre-installed Power Module | PWR-100-LV |
Note | The EDS-4012 Series supports modular power supplies. The model names and power parameters are determined by the installed power module. For example:- EDS-4012-4GS-T + PWR-100u2013LV = EDS-4012-4GS-LV-T
- EDS-4012-4GS-T + PWR-105-HV-I = EDS-4012-4GS-HV-T
If you install a different power module, refer to the specifications of the corresponding model. For example, if you replace the power module of the EDS-4012-4GS-LV-T with the PWR-105-HV-I, refer to the specifications of the EDS-4012-GS-HV-T. |
Input Voltage | - 12/24/48 VDC
- Redundant dual inputs.
|
Operating Voltage | 9.6 to 60 VDC |
Input Current | 12-48 VDC, 1.50-0.40 A or 24 VDC, 0.70 A |
Power Consumption (Max.) | 10.7 W |
Maximum PoE Power Output per Port | 90 W |
Overload Current Protection | Supported |
Reverse Polarity Protection | Supported |
Physical Characteristics |
IP Rating | IP40 |
Dimensions | 55 x 140 x 120 mm (2.17 x 5.51 x 4.72 in) |
Weight | 827 g (1.82 lb) |
Installation | - DIN-rail mounting
- Wall mounting
|
Housing | Metal |
Environmental Limits |
Operating Temperature | -40 to 75°C (-40 to 167°F) |
Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications |
Industrial Cybersecurity | IEC 62443-4-1 ; IEC 62443-4-2 |
Safety | - UL 61010-2-201
- EN 62368-1 (LVD)
|
EMC | - EN 55032/35
- EN 61000-6-2/-6-4
|
EMI | CISPR 32, FCC Part 15B Class A |
EMS | - IEC 61000-4-2 ESD: Contact: 8 kV
- Air: 15 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
- IEC 61000-4-4 EFT: Power: 4 kV
- Signal: 4 kV
- IEC 61000-4-5 Surge: Power: 4 kV
- Signal: 4 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8 PFMF
|
Maritime | |
Vibration | IEC 60068-2-6 |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Railway | EN 50121-4 |
Traffic Control | NEMA TS2 |
Power Substation | - IEC 61850-3
- IEEE 1613 Class 1
|
Hazardous Locations | - IECEx
- ATEX
- Class I Division 2
|
MTBF |
Time | 1,036,336 hrs |
Standards | Telcordia SR332 |