Maruson, PRO-2000LCD, Line Interactive UPS, 2000VA/1200W
Features:
- (4) Battery-Backed Outlets with AVR Function and Surge Protection:
- These outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes
- If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets
- (4) Surge-Protected Outlets:
- Connect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes
- Automatic Voltage Regulation (AVR):
- Automatically boosts or bucks minor voltage irregularities instead of switching to battery backup mode. By regulating the output voltage rather than using the battery, the UPS prolongs the lifespan of your battery and protects connected equipment against spikes, surges, brownouts, minor overvoltages and under voltages, and temporary blackouts
- The more boosts and bucks there are, the wider the acceptable input voltage range is, which will decrease the need to switch to battery power, therefore prolonging the lifespan of your battery. This series offers two-step boost and one-step buck AVR functions
- Overload Protection:
- Protects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on
- Smart Battery Management:
- Maximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels
- Power Management Software:
- Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more
- Phone / Network / Fax Line Suppression (RJ-11/45 Ports):
- Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line
- Cold Start Capable:
- Turn on the UPS even without utility power as long as there is sufficient battery power
- Auto-Restart During AC Recovery:
- Once power returns to normal and the battery levels are sufficient, the UPS will automatically restart
- Off-Mode Charging:
- The UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket
- LCD Screen:
- See real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more
- Enable / Disable Audible Alarm:
- Enable or disable the audible alert for your unit
- To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state.
The PowerPro LCD UPS Series offers line-interactive topology along with automatic voltage regulation, transient surge suppression, and sufficient battery backup time for temporary power outages while protecting connected equipment against blackouts, brownouts, overvoltages, transient surges, spikes, and data line noise. In the event of a prolonged power outage, the internal battery provides temporary power so connected equipment can be properly shut down and in doing so, protects the equipment from hardware damage and data loss from the system crashes. Use the included software to connect the UPS to your computer for expanded control and monitoring. The compact tower form factor is perfect for desktops or floorspace without taking up too much room.
