K-Tek KP16 KlassicPro 16' Graphite 6-Section Boom Pole, Uncabled

The KP16, KlassicPro Boompole has a collapsed length of 44" / 111.8 cm and an extended length of 9" / 4.88 m and only weighs 2.0 lbs / 0.9 kg. This 6-section Boompole features a removable headpiece for cable reconfiguration without soldering. The top attachment is a 3/8" - 16 male thread and the bottom has a removable rubber bumper. Made in the USA. The K-Tek Klassic Poles offer increased interchangeability with its removable headpiece. Gone are the soldered and sealed poles of the past. Today's redesigned headpiece, after removing a standard sized set screw, simply threads on and off the tube smoothly. The cable of choice can be removed or installed-without soldering. The boompole is readily transformed to un-cabled, coil cabled, straight cabled or with a transmitter at the top or the bottom. There are no more time-consuming transformations and no need to purchase a completely system just to comply with a cabling change. K-Tek has designed poles that are more rigid and have a shorter collapsed length that is desired in today's production environment. KlassicPro's maintain the original light weight of the tubes, yet the design features added strength. Also, adding a sixth section and wider tubes increases the stiffness and optimizes handling balance. The result is quicker cuing and more user control of the microphone. Another benefit is a change to the locking collars. The traditional K-Tek captive collett has been modified with a thicker yet smoother surface allowing for more subtle, gradual extension of each section. A anodizing process combined with changing the exterior dimples to oval divets gives a better grip and smoother feel when opening and closing each collar. The finish between the tubes has also been modified so the KlassicPro sleekly glides open and closed. KlassicPro poles are hand-burnished to diffuse handling noise. Compatible with the KPCK16 cable kit and bottom (KPCCR) module to allow for a coil cable option with a side XLR exit.