Frequency Range (-10dB) | 41 Hz to 17 kHz |
Frequency Response (±3 dB) | 49 Hz to 15 kHz |
Coverage Pattern | 90° x 50° |
Crossover Modes | Tri-amp / Bi-amp (passive mid-high) switchable |
Passive Crossover | 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.5 kHz |
Transducer Power Rating (AES) | - LF: 1600 W (6400 W peak), 2 hrs. 1200 W (4800 W peak), 100 hrs
- MF: 350 W (1400 W peak), 100 hrs
- HF: 75 W (300 W peak), 2 hrs
|
System Power Rating | - LF: 1200 W (4800 W peak)
- MF/HF: 300 W (1200 W peak), 100 hrs
|
Maximum SPL (1m) | - Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak)
- MF: 134 dB-SPL cont avg (140 dB peak)
- HF: 133 dB-SPL cont avg (139 dB peak)
- Passive mode: 134 dB-SPL cont avg (140 dB peak)
|
System Sensitivity (1w at 1m) | Passive Mode: 109 dB-SPL (mid/high section only) |
LF Driver | 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil |
MF Driver | - CMCD-82H cone midrange compression driver with integral 200 mm (8 in) diameter
- Differential Drive® dual 75 mm (3 in) voice coil driver
|
HF Driver | 2432H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil |
Enclosure | Trapezoidal with 12.5 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood. |
Suspension Attachment | 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included). |
Finish | White DuraFlex™ finish |
Grille | Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units) |
Input Connectors | - Neutrik Speakon® NL8, plus CE-compliant covered barrier strip terminals
- Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs
- Speakon in parallel with barrier strip for loop through.
|
Environmental | Mil-Std 810; IP-x3 per IEC529 |
Dimensions (H x W x D in vertical orientation) | 991 x 673 x 897 mm (39.0 x 26.5 x 35.3 in) |
Net Weight (each) | 77 kg (170 lb) |
Nominal Impedance | 4 ohms (2 x 8 ohms, internally wired in parallel) |
Nominal LF Driver Impedance | 4 ohms (2 x 8 ohms, internally wired in parallel) |
Nominal MF Driver Impedance | 8 ohms |
Nominal HF Driver Impedance | 8 ohms |