Buy INOR 70ISL64100, IsoPAQ-641 High-Performance Isolation Transmitter

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Features:

Calibrated signal setting via DIP switch. Input and output range can be set by using DIP switch - high precision without any further adjustment
3-Port Isolation. Protection against erroneous measurements due to parasitic voltages or ground loops
Extremely slim design. 6.2 mm slim housing for a simple and space saving DIN rail mounting
Protective Separation acc. to EN 61140. Protects service personnel and downstream devices against impermissibly high voltage
Maximum reliability. No maintenance costs

The Isolation Amplifier is used for isolation and conversion of 0/4 ... 20 mA and 0/2 ... 10 V standard signals.

The input and output range of it can be easily set by using DIP switch. Due to the calibrated range selection no further adjustment is necessary. Also the cut-off frequency can be adapted to the measurement task by using the DIP Switch.

A green LED on the front of the unit has been provided to monitor the power supply.

For more information, please see Data Sheet

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for INOR items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Input

Input signal (calibrated switchable)

0 ... 20 mA, 4 ... 20 mA
0 ... 10 V, 2 ... 10 V

Input resistance

Current input ≤ 25 Ω
Voltage input ≥ 100 kΩ

Overload

Current input < 50 mA
Voltage input < 30 V

Output

Output signal (calibrated switchable)

0 ... 20 mA, 4 ... 20 mA
0 ... 10 V, 2 ... 10 V

Load

Current output: ≤ 12 V (600 Ω at 20 mA)
Voltage output: ≤ 5 mA (2 kΩ at 10 V)

Linear transmission range

-1 ... +110 %

Residual ripple

< 10 mV/rms

General Data

Transmission error

< 0.1 % full scale

Temperature coefficient

< 100 ppm/K

Cut-off frequency -3 dB

5 kHz, 100 Hz, 10Hz

Response time T₉₉

150 µs, 7 ms, 70 ms

Test voltage

3 kV AC, 50 Hz, 1 min. Input against output against power supply

Working voltage (Basic insulation)

600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1

Protection against electrical shock

Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between
all circuits

Ambient temperature

Operation: - 25 °C to + 70 °C (- 13 to + 158 °F)
Transport and storage: - 40 °C to + 85 °C (- 40 to + 185 °F)

Power supply

24 V DC voltage range 16.8 V ... 31.2 V, approx. 0.7 W

EMC

EN 61326-1

Construction

62 x 96,5 x 107 mm , protection class IP 20, mounting on 35 mm DIN rail acc. to EN 60715

Weight

Approx. 70 g

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details