Features:
- 8 digit vacuum fluorescent display (VFD) 0.5" (12.5 mm)
- 19-key sealed membrane with audible and tactile feedback
- 7 selectable modes of operation: Normal; Fill to set point;
- Over/Under Check weigh; Vehicle Weigh-In/Out with report totals;
- Multi-Container/Auto Weigh & Print; Unattended Axle Weigh with
- Traffic Light Control (Short/Long Scales); ID Tare, Print & Total
- Programmable in Scale Basic macro language for application
- development (event driven)
- Continuous serial scale input protocol with interfaces for a wide
- variety of indicators and balances
- Simulates A&D, Condec, Weigh-Tronix and Ohaus continuous
- serial output communications protocols; Provides user
- programmable custom protocol
- Password protection to prevent unauthorized tampering
- Built in diagnostic functions for memory, display and I/O ports
- Primary and secondary units with conversion factors
- Digital/Parallel port for relay control or Centronics printer interface
- 3 full duplex serial ports: RS232, RS485 and 20mA current loop
- Selectable baud rates and data formats
- Barcode scanner/card reader or PC serial input interface
- Time and Date Clock Y2K and Leap Year compliant
- 32K non-volatile RAM provides 500 stored IDs (part, truck, etc.)
- Selectable address for multi-drop RS485 network interface
- When used with the optional digital summing module (DSM), the
- SDT200 offers a complete digital weigh
Applications:
- 7 Built in modes of operation
- Gross, tare and net weighing
- Vehicle and railroad weighing
- Multi-container and axle weighing
- Label formatting and page printing
- Keyboard and ID recall tare weights
- Single step or weigh-in and weigh-out
- Interface to Distributed Control System
- Batching and process control systems
- Integrator for basic balances and indicators
The SDT200 is fully programmable in an easy and flexible macro language called Scale Basic. In addition to the built-in modes of operation, Scale Basic allows you to customize the operation of the SDT200 to meet your application requirements. The Scale Basic language provides various commands and functions that include: math operations, I/O control, set points, timers, data entry, ID storage, message display, and program sequence control among others. Programming the SDT200 can be performed through the keyboard or a PC using the optional EZ-LINK software that greatly facilitates setup and programming.
mode 0 - Normal Basic gross, tare and net weighing mode 1 - Fill to set point single set point fill with relay output control and weight print mode 2 - Over/Under Check weigh Provides 3 TTL outputs and 2 set points to indicate over, under and between weight conditions. Outputs can activate lights or alarms mode 3 - Vehicle Weigh-In/Out with Totals Weigh-In/Out program for up to 500 vehicles; Maintains running totals for each vehicle; Provides reporting functions mode 4 - Multi-Container/Unattended Axle Weighing Auto weighs and prints each weight placed on the scale; Each weightis sequentially numbered and accumulated; The total can be printed manually or automatically; Provides traffic light control mode 5 - Unattended Axle Weigh (Long Scales)Same as mode 4 but previous axles are auto tared mode 6 - ID Tare, Print and Total Provides tare entry and recall by ID; Prints ID, sequence # and GTN weights; Keeps running totals by ID; Provides reporting functions
