Buy IFM SUH201, PNP/NPN 1 - 240 l/min Ultrasonic Flow Meter

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Features:

Accurate flow measurement of ultrapure water and water
A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance
The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials
Operating status LED signals the sensor status and allows conclusions about process quality

Principle of Operation

Ultrasonic flow meters consist of transducers that transmit and receive sound pulses. Medium on the opposite pipe wall diverts the direction of the transmitted pulse from one transducer to the other. A pulse is sent through the medium and the sensor measures the time of flight from one transducer to the other. Then a pulse is sent in the opposite direction. The meter measures the difference in time and calculates the flow rate.

The internal pipe of the meter is constructed of only 316 stainless steel with no obstructions in the flow. There is a small reduction in sensing area through the sensor which leads to a minimal pressure drop

Signal Quality of Application

Monitoring the conditions of the ultrasonic sensors' signal strength indicates what is going on inside your pipe system. As a result, possible maintenance measures can be taken at an early stage and machine downtimes can be minimized.

The unit detects the signal quality in three levels:

Normal: The unit works without restrictions.
Low: The signal quality is disturbed but the unit is still in specification. Check for air bubbles, particles, or build-up.
No signal: No medium is present or no signal is possible due to extreme conditions.
- Extreme conditions = excessive particles or bubbles, such as foam; and adhesions/ build-up on the internal pipe that strongly disrupt the signal.

Diagnostic LED color definitions

For more information, please see pdf file Data Sheet

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for IFM items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Product Characteristics
Process Connection	Clamp 1" DIN 32676 series C
System	Gold-plated contacts
Media	Ultra-pure water; water; water-based media
Vacuum Resistance [mbar]	-1000
Electrical Data
Operating Voltage [V]	18 - 32 DC; (to SELV/PELV)
Current Consumption [mA]	< 75
Protection Class	III
Reverse Polarity Protection	Yes
Power-on Delay Time [s]	5
Measuring Principle	Ultrasonic
Inputs / Outputs
Total Number of Inputs and Outputs	2
Inputs
Outputs
Total Number of Outputs	2
Electrical Design	PNP/NPN
Short-Circuit Protection	Yes
Type of Short-Circuit Protection	Yes (non-latching)
Overload Protection	Yes
Analog
Number of Analog Outputs	1
Analog Current Output [mA]	4 - 20
Maximum Load [Ω ]	500
Digital
Number of Digital Outputs	2
Output Function	Normally open / closed; (configurable)
Maximum Voltage Drop Switching Output DC [V]	2
Permanent Current Rating of Switching Output DC [mA]	100
Switching Frequency DC [Hz]	0 - 10000
Measuring/Setting Range
Frequency at the end point FRP [Hz]	1 - 10000
Volumetric flow quantity monitoring
Pulse length [s]	0.002 - 2
Pulse value	0.02 - 99990000 l; 0.026 - 26414563.515 gal
Temperature Monitoring
Frequency at the end point FRP [Hz]	1 - 10000
Accuracy / deviations Flow monitoring
Accuracy (in the Measuring Range)	± (1,0 % MW + 0,5 % MEW)
Repeatability	± 0,2 % MEW
Temperature Monitoring
Accuracy [K]	± 2,5 (Q>5 % MEW)
Temperature coefficient [% of the span / 10 K]	0,2
Reaction Times Flow monitoring
Response Time [s]	< 0.25; (dAP = 0, T09)
Damping Process Value dAP [s]	0 - 5
Temperature Monitoring
Dynamic Response T05 / T09 [s]	5,7 / 86
Software / Programming
Diagnostic functions	Direction of flow detection; signal quality
Interfaces
Communication Interface	IO-Link
Transmission Type	COM2 (38,4 kBaud)
IO-Link Revision	1.1.3
SDCI Standard	IEC 61131-9: 2013-07
Required Master Port Class	A
Process Data Analog	3
Process Data Binary	2
Minimum Process Cycle Time [ms]	9.6
Operating Conditions
Ambient Temperature [° C]	-20 - 60
Storage Temperature [° C]	-25 - 80
Protection	IP 69K
MTTF [Years]	160
Pressure Equipment Directive	Can be used for group 2 fluids; group 1 fluids on request
Mechanical Data
Weight [g]	639.4
Inlet pipe length	5 x DN
Outlet pipe length	1 x DN
Material	Housing: stainless steel (1.4404 / 316L); Display: PFA; sealing Display: FKM; connector: POKAN
Materials (Wetted Parts)	Pipe section: stainless steel (1.4404 / 316L)
Nominal diameter	DN25
Process Connection	Clamp 1" DIN 32676 series C
Process Connection suitable for pipe standard	1" / Ø 25,4 mm x 1,65 mm (DIN 11866 series C; ASME BPE)
Surface characteristics Ra/Rz of the wetted parts	≤ 0.8 μ m / 32 μ in
Electrical Connection
Connection	Connector: 1 x M12; coding: A; Contacts: gold-plated

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Product Characteristics
Process Connection	Clamp 1" DIN 32676 series C
System	Gold-plated contacts
Media	Ultra-pure water; water; water-based media
Vacuum Resistance [mbar]	-1000
Electrical Data
Operating Voltage [V]	18 - 32 DC; (to SELV/PELV)
Current Consumption [mA]	< 75
Protection Class	III
Reverse Polarity Protection	Yes
Power-on Delay Time [s]	5
Measuring Principle	Ultrasonic
Inputs / Outputs
Total Number of Inputs and Outputs	2
Inputs
Outputs
Total Number of Outputs	2
Electrical Design	PNP/NPN
Short-Circuit Protection	Yes
Type of Short-Circuit Protection	Yes (non-latching)
Overload Protection	Yes
Analog
Number of Analog Outputs	1
Analog Current Output [mA]	4 - 20
Maximum Load [Ω ]	500
Digital
Number of Digital Outputs	2
Output Function	Normally open / closed; (configurable)
Maximum Voltage Drop Switching Output DC [V]	2
Permanent Current Rating of Switching Output DC [mA]	100
Switching Frequency DC [Hz]	0 - 10000
Measuring/Setting Range
Frequency at the end point FRP [Hz]	1 - 10000
Volumetric flow quantity monitoring
Pulse length [s]	0.002 - 2
Pulse value	0.02 - 99990000 l; 0.026 - 26414563.515 gal
Temperature Monitoring
Frequency at the end point FRP [Hz]	1 - 10000
Accuracy / deviations Flow monitoring
Accuracy (in the Measuring Range)	± (1,0 % MW + 0,5 % MEW)
Repeatability	± 0,2 % MEW
Temperature Monitoring
Accuracy [K]	± 2,5 (Q>5 % MEW)
Temperature coefficient [% of the span / 10 K]	0,2
Reaction Times Flow monitoring
Response Time [s]	< 0.25; (dAP = 0, T09)
Damping Process Value dAP [s]	0 - 5
Temperature Monitoring
Dynamic Response T05 / T09 [s]	5,7 / 86
Software / Programming
Diagnostic functions	Direction of flow detection; signal quality
Interfaces
Communication Interface	IO-Link
Transmission Type	COM2 (38,4 kBaud)
IO-Link Revision	1.1.3
SDCI Standard	IEC 61131-9: 2013-07
Required Master Port Class	A
Process Data Analog	3
Process Data Binary	2
Minimum Process Cycle Time [ms]	9.6
Operating Conditions
Ambient Temperature [° C]	-20 - 60
Storage Temperature [° C]	-25 - 80
Protection	IP 69K
MTTF [Years]	160
Pressure Equipment Directive	Can be used for group 2 fluids; group 1 fluids on request
Mechanical Data
Weight [g]	639.4
Inlet pipe length	5 x DN
Outlet pipe length	1 x DN
Material	Housing: stainless steel (1.4404 / 316L); Display: PFA; sealing Display: FKM; connector: POKAN
Materials (Wetted Parts)	Pipe section: stainless steel (1.4404 / 316L)
Nominal diameter	DN25
Process Connection	Clamp 1" DIN 32676 series C
Process Connection suitable for pipe standard	1" / Ø 25,4 mm x 1,65 mm (DIN 11866 series C; ASME BPE)
Surface characteristics Ra/Rz of the wetted parts	≤ 0.8 μ m / 32 μ in
Electrical Connection
Connection	Connector: 1 x M12; coding: A; Contacts: gold-plated

Return and Warranty

Please note that return requests for IFM items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

IFM SUH201 PNP/NPN 1 - 240 l/min Ultrasonic Flow Meter

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews