Product Characteristics| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Process Connection | Threaded connection G 1 flat seal |
| System | Gold-plated contacts |
| Application | Totalizer function; for industrial applications |
| Installation | Connection to pipe by means of an adapter |
| Media | Water; glycol solutions; Coolants; oils |
| Medium temperature [° F] | 14 - 176 |
| Pressure Rating [bar] | 16 |
| Pressure rating [psi] | 232 |
| Electrical Data |
| Operating Voltage [V] | 19 - 30 DC; (to SELV/PELV) |
| Current Consumption [mA] | 100 |
| Minimum Insulation Resistance [MΩ ] | 100; (500 V DC) |
| Protection Class | III |
| Reverse Polarity Protection | Yes |
| Power-on Delay Time [s] | 10 |
| Inputs / Outputs |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Inputs |
| Inputs | Counter reset |
| Outputs |
| Total Number of Outputs | 2 |
| Output Signal | Switching signal; analog signal; pulse signal; (configurable) |
| Electrical Design | PNP/NPN |
| Number of Digital Outputs | 2 |
| Output Function | Normally open / closed; (configurable) |
| Maximum Voltage Drop Switching Output DC [V] | 2 |
| Permanent Current Rating of Switching Output DC [mA] | 250; (per output) |
| Number of Analog Outputs | 1 |
| Analog Current Output [mA] | 4 - 20; (scalable) |
| Maximum Load [Ω ] | 500 |
| Analog Voltage Output [V] | 0 - 10; (scalable) |
| Minimum Load Resistance [Ω ] | 2000 |
| Pulse output | Flow rate meter |
| Short-Circuit Protection | Yes |
| Type of Short-Circuit Protection | Yes (non-latching) |
| Overload Protection | Yes |
| Measuring/Setting Range |
| Volumetric flow quantity monitoring |
| Pulse value | 0.02 - 9000 * 10³ gal |
| In steps of | 0.02 gal |
| Pulse length [s] | 0,3 - 2 |
| Temperature Monitoring |
| Measuring range [° F] | 14 - 176 |
| Resolution [° F] | 0.5 |
| Set point SP [° F] | 14.5 - 176 |
| Reset point rP [° F] | 14 - 175.5 |
| Analog start point [° F] | 14 - 145.5 |
| Analog end point [° F] | 44.5 - 176 |
| In steps of [° F] | 0.5 |
| Accuracy / deviations Flow monitoring |
| Accuracy (in the Measuring Range) | Water: <± (3 % MW + 0,2 % MEW); glycol (35 %), oil (viscosity 68 mm² /s at 40 ° C): <± (5 % MW + 0,5 % MEW) |
| Repeatability | 0,05 gpm; 3 gph |
| Temperature Monitoring |
| Accuracy [K] | ± 5,4 (Q>0,26 gpm) |
| Reaction Times Flow monitoring |
| Response Time [s] | 0.25; (dAP = 0) |
| Delay Time Programmable dS, dr [s] | 0 - 50 |
| Damping Process Value dAP [s] | 0 - 1 |
| Temperature Monitoring |
| Dynamic Response T05 / T09 [s] | T09 = 70 (Q>1 gpm); (water) |
| Software / Programming |
| Parameter Setting | Flow monitoring; quantity meter; Preset counter; Temperature Monitoring |
| Operating Conditions |
| Ambient Temperature [° F] | 14 - 140 |
| Storage Temperature [° F] | -13 - 176 |
| Protection | IP 67 |
| MTTF [Years] | 185 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Mechanical Data |
| Weight [g] | 1666.5 |
| Material | Housing: AlMgSi0.5 anodized; sealing: FKM; PA 6.6; cover film: PA |
| Materials (Wetted Parts) | Stainless steel (1.4404 / 316L); FKM; PES; Centellen 200 |
| Process Connection | Threaded connection G 1 flat seal |
