Buy IFM SM9000, Magnetic-Inductive 5 - 300 l/min Flow Meter

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Options and Related Products

Measuring Range (l/min):: Measuring Range (l/min): 5 - 300

Features:

Precise measurement of flow, consumption and medium temperature
High accuracy, repeatability and measurement dynamics
Precise empty pipe detection
With switching output, analog output and pulse output
Clearly visible numerical display

Applications

Totalizer function
For industrial applications

Magnetic flow meters, commonly known as magmeters, utilize the principles outlined in Faraday's law of induction to accurately measure the flow of conductive liquids in various industrial settings.

Magnetic-Inductive Principle of Operation

Graphic of coil, electrodes and magnets showing the principle of operation of magmeters

The magnetic-inductive, or magmeter, measuring principle operates according to Faraday's law of induction. Faraday's principle predicts how a magnetic field will react when a voltage is induced in the field.

When a conductive medium flows through a pipe in a magnetic field, the charged particles from the conductive media are directed to an electrode on one side based on the flow direction. Depending on the flow velocity, more or fewer charge carriers are led past the electrode, generating a voltage proportional to the flow velocity or volumetric flow quantity. The voltage is tapped via the measuring electrodes and converted in the evaluation electronics to a usable control signal. As the pipe cross-section is defined, the volumetric flow quantity can be determined exactly.

Farady's Law and Magmeters

When a conductive fluid moves through the magmeter's magnetic field, it induces a voltage. This voltage can then be measured to determine the flow rate of the fluid. Electrodes within the magmeter tap into this voltage. It's then converted within the device's electronics to give a usable control signal that tells us the flow rate of the fluid.

Not every fluid can work with a magmeter. The fluid must be conductive for the device to measure its flow rate. The more conductive the medium, the clearer the reading. Thus, they work was as water flow meters among other liquids.

For more information, please see pdf file Data Sheet

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for IFM items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Product Characteristics

Number of Inputs and Outputs

Number of Digital Outputs: 2

Number of Analog Outputs: 1

Process Connection

Threaded connection G 2 DN50 flat seal

System

Gold-plated contacts

Application

Totalizer function; empty pipe detection; for industrial applications

Installation

Connection to pipe by means of an adapter

Media

Conductive liquids; water; water-based media

Medium Temperature [° C]

-10 - 90

Pressure Rating [bar]

Pressure Rating [MPa]

1.6

MAWP (for Applications According to CRN) [bar]

Electrical Data

Operating Voltage [V]

18 - 32 DC; (to SELV/PELV)

Current Consumption [mA]

< 150

Protection Class

III

Reverse Polarity Protection

Yes

Power-on Delay Time [s]

Inputs / Outputs

Number of Inputs and Outputs

Number of Digital Outputs: 2

Number of Analog Outputs: 1

Inputs

Counter reset

Outputs

Total Number of Outputs

Output Signal

Switching signal; analog signal; pulse signal; frequency signal; IO-Link; (configurable)

Electrical Design

PNP/NPN

Number of Digital Outputs

Output Function

Normally open / closed; (configurable)

Maximum Voltage Drop Switching Output DC [V]

Permanent Current Rating of Switching Output DC [mA]

250; (per output)

Number of Analog Outputs

Analog Current Output [mA]

4 - 20; (scalable)

Maximum Load [Ω ]

500

Analog Voltage Output [V]

0 - 10; (scalable)

Minimum Load Resistance [Ω ]

2000

Pulse output

Flow rate meter

Short-Circuit Protection

Yes

Type of Short-Circuit Protection

Yes (non-latching)

Overload Protection

Yes

Frequency of the output [Hz]

0.1 - 10000

Measuring/Setting Range

Measuring dynamics

1: 60

Volumetric flow quantity monitoring

Pulse value

0.0001 - 300 x 10³ m³

In steps of

0.0001 m³

Pulse length [s]

0,016 - 2

Temperature Monitoring

Measuring Range [° C]

-20 - 80

Display range [° C]

-40 - 100

Resolution [° C]

0.2

Set point SP [° C]

-19.2 - 80

Reset point rP [° C]

-19.6 - 79.6

Analog Start Point [° C]

-20 - 60

Analog End Point [° C]

0 - 80

In Steps of [° C]

0.2

Accuracy / deviations Flow monitoring

Accuracy (in the Measuring Range)

± (0,8 % MW + 0,5 % MEW)

Repeatability

± 0,2% MEW

Temperature Monitoring

Temperature Drift

± 0,0333 ° C / K

Accuracy [K]

± 1 (25 ° C; Q>15 l/min)

Reaction Times Flow monitoring

Response Time [s]

0.35; (dAP = 0)

Delay Time Programmable dS, dr [s]

0 - 50

Damping Process Value dAP [s]

0 - 5

Temperature Monitoring

Dynamic Response T05 / T09 [s]

T09 = 3 (Q>15 l/min)

Software / Programming

Parameter Setting

Flow monitoring; quantity meter; Preset counter; Temperature Monitoring; hysteresis / window; normally open / closed; switching logic; current/voltage/frequency/pulse output; Start-up delay; display can be deactivated; Display Unit; empty pipe detection

Interfaces

Communication Interface

IO-Link

Transmission Type

COM2 (38,4 kBaud)

IO-Link Revision

1.1

SDCI Standard

IEC 61131-9 CDV

Profiles

Smart Sensor: Process Data Variable; Device Identification

SIO Mode

Yes

Required Master Port Class

Process Data Analog

Process Data Binary

Minimum Process Cycle Time [ms]

Operating Conditions

Ambient Temperature [° C]

-10 - 60

Storage Temperature [° C]

-25 - 80

Protection

IP 65
IP 67

MTTF [Years]

Pressure Equipment Directive

Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical Data

Weight [g]

3176

Material

Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEI; FKM; PBT-GF20; TPE-U

Materials (Wetted Parts)

Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; Centellen; FKM

Process Connection

Threaded connection G 2 DN50 flat seal

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Product Characteristics

Number of Inputs and Outputs

Number of Digital Outputs: 2

Number of Analog Outputs: 1

Process Connection

Threaded connection G 2 DN50 flat seal

System

Gold-plated contacts

Application

Totalizer function; empty pipe detection; for industrial applications

Installation

Connection to pipe by means of an adapter

Media

Conductive liquids; water; water-based media

Medium Temperature [° C]

-10 - 90

Pressure Rating [bar]

Pressure Rating [MPa]

1.6

MAWP (for Applications According to CRN) [bar]

Electrical Data

Operating Voltage [V]

18 - 32 DC; (to SELV/PELV)

Current Consumption [mA]

< 150

Protection Class

III

Reverse Polarity Protection

Yes

Power-on Delay Time [s]

Inputs / Outputs

Number of Inputs and Outputs

Number of Digital Outputs: 2

Number of Analog Outputs: 1

Inputs

Counter reset

Outputs

Total Number of Outputs

Output Signal

Switching signal; analog signal; pulse signal; frequency signal; IO-Link; (configurable)

Electrical Design

PNP/NPN

Number of Digital Outputs

Output Function

Normally open / closed; (configurable)

Maximum Voltage Drop Switching Output DC [V]

Permanent Current Rating of Switching Output DC [mA]

250; (per output)

Number of Analog Outputs

Analog Current Output [mA]

4 - 20; (scalable)

Maximum Load [Ω ]

500

Analog Voltage Output [V]

0 - 10; (scalable)

Minimum Load Resistance [Ω ]

2000

Pulse output

Flow rate meter

Short-Circuit Protection

Yes

Type of Short-Circuit Protection

Yes (non-latching)

Overload Protection

Yes

Frequency of the output [Hz]

0.1 - 10000

Measuring/Setting Range

Measuring dynamics

1: 60

Volumetric flow quantity monitoring

Pulse value

0.0001 - 300 x 10³ m³

In steps of

0.0001 m³

Pulse length [s]

0,016 - 2

Temperature Monitoring

Measuring Range [° C]

-20 - 80

Display range [° C]

-40 - 100

Resolution [° C]

0.2

Set point SP [° C]

-19.2 - 80

Reset point rP [° C]

-19.6 - 79.6

Analog Start Point [° C]

-20 - 60

Analog End Point [° C]

0 - 80

In Steps of [° C]

0.2

Accuracy / deviations Flow monitoring

Accuracy (in the Measuring Range)

± (0,8 % MW + 0,5 % MEW)

Repeatability

± 0,2% MEW

Temperature Monitoring

Temperature Drift

± 0,0333 ° C / K

Accuracy [K]

± 1 (25 ° C; Q>15 l/min)

Reaction Times Flow monitoring

Response Time [s]

0.35; (dAP = 0)

Delay Time Programmable dS, dr [s]

0 - 50

Damping Process Value dAP [s]

0 - 5

Temperature Monitoring

Dynamic Response T05 / T09 [s]

T09 = 3 (Q>15 l/min)

Software / Programming

Parameter Setting

Interfaces

Communication Interface

IO-Link

Transmission Type

COM2 (38,4 kBaud)

IO-Link Revision

1.1

SDCI Standard

IEC 61131-9 CDV

Profiles

Smart Sensor: Process Data Variable; Device Identification

SIO Mode

Yes

Required Master Port Class

Process Data Analog

Process Data Binary

Minimum Process Cycle Time [ms]

Operating Conditions

Ambient Temperature [° C]

-10 - 60

Storage Temperature [° C]

-25 - 80

Protection

IP 65
IP 67

MTTF [Years]

Pressure Equipment Directive

Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical Data

Weight [g]

3176

Material

Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEI; FKM; PBT-GF20; TPE-U

Materials (Wetted Parts)

Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; Centellen; FKM

Process Connection

Threaded connection G 2 DN50 flat seal

Return and Warranty

Please note that return requests for IFM items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

IFM SM9000 Magnetic-Inductive 5 - 300 l/min Flow Meter

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews