Buy IFM SB7243, 1 - 25 l/min Flow Meter for 320 mm2/s Viscosity Liquids

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Options and Related Products

Measuring Range (l/min):: Measuring Range (l/min): 1 - 25

IFM, SB7243, 1 - 25 l/min Flow Meter for 320 mm2/s Viscosity Liquids and Oils

Features:

Fast flow or temperature changes do not affect the measurement
High measurement dynamics reduces type versions
No inlet and output pipe lengths required
Specifically adjusted to oil for optimum measurement results

Principle of operation for mechatronic flow meters

The SB mechatronic flow meter works on the principle of a spring-supported piston. Flowing liquids lift the piston and the position of the piston is monitored by a magnetic sensor. The spring forces the piston to its original position with decreasing flow and the built-in check valve prevents back flow.

Flow direction being detected by an SB mechatronic flow meter

This design means the meter can be installed without regard to inlet/outlet piping requirements. Because a magnetic sensor is detecting the piston position, response time is ≤ 10 msec. Since flow is typically relatively stable, there is very little flexing of the spring. The meter has been successfully tested to 10 million cycles without any detectable wear.

For more information, please see pdf file Data Sheet

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for IFM items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Product Characteristics

Process Connection

Threaded connection G 1 Internal thread

System

Gold-plated contacts

Media

Liquids; oils (viscosity 320 mm² /s at 40 ° C)

Medium Temperature [° C]

-10 - 100

Pressure Rating [bar]

100

Pressure Rating [MPa]

Electrical Data

Operating Voltage [V]

18 - 30 DC; (to SELV/PELV ; cULus - Class 2 source required)

Current Consumption [mA]

< 50

Protection Class

III

Reverse Polarity Protection

Yes

Power-on Delay Time [s]

< 3

Outputs

Total Number of Outputs

Output Signal

Switching signal; analog signal; frequency signal; IO-Link

Maximum Voltage Drop Switching Output DC [V]

Maximum Current Load per Output [mA]

150; (200: - 60 ° C; Ambient Temperature; 250: - 40 ° C; Ambient Temperature)

Analog Current Output [mA]

4 - 20

Maximum Load [Ω ]

500

Short-Circuit Protection

Yes

Overload Protection

Yes

Frequency of the output [Hz]

0 - 10000

Measuring/Setting Range

Frequency at the end point FRP [Hz]

10 - 10000

In steps of [Hz]

Measuring dynamics

1: 50

Temperature Monitoring

Frequency at the end point FRP [Hz]

10 - 10000

Accuracy / deviations Flow monitoring

Accuracy (in the Measuring Range)

± 5 % MEW; (Q>1 l/min; 20 - 70 ° C Medium temperature)

Repeatability

± 1 % MEW

Temperature Monitoring

Temperature Drift

0,029 ° C / K

Accuracy [K]

3 K (25° C; Q>1 l/min)

Reaction Times Flow monitoring

Response Time [s]

0.01

Damping Process Value dAP [s]

0 - 5

In steps of [s]

0.1

Damping for the Analog Output dAA [s]

0 - 5

In steps of [s]

0.1

Temperature Monitoring

Dynamic Response T05 / T09 [s]

T09 = 120 (Q>1 l/min)

Software / Programming

Parameter Setting

Hysteresis / window; normally open / closed; switching logic; current/frequency output; damping for the switching output / analog output; display can be rotated and switched off; standard unit of measurement; process value color; calibration factor

Interfaces

Communication Interface

IO-Link

Transmission Type

COM2 (38,4 kBaud)

IO-Link Revision

1.1

SDCI Standard

IEC 61131-9 CDV

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

SIO Mode

Yes

Required Master Port Class

Process Data Analog

Process Data Binary

Minimum Process Cycle Time [ms]

3.2

Operating Conditions

Ambient Temperature [° C]

0 - 60

Storage Temperature [° C]

-15 - 80

Protection

IP 65
IP 67

Pressure Equipment Directive

Sound engineering practice

Mechanical Data

Weight [g]

1604

Material

Stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated

Materials (Wetted Parts)

Stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM

Process Connection

Threaded connection G 1 Internal thread

Switching Cycles Mechanical

10 million

Electrical Connection

Connection

Connector: 1 x M12; coding: A; Contacts: gold-plated

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Product Characteristics

Process Connection

Threaded connection G 1 Internal thread

System

Gold-plated contacts

Media

Liquids; oils (viscosity 320 mm² /s at 40 ° C)

Medium Temperature [° C]

-10 - 100

Pressure Rating [bar]

100

Pressure Rating [MPa]

Electrical Data

Operating Voltage [V]

18 - 30 DC; (to SELV/PELV ; cULus - Class 2 source required)

Current Consumption [mA]

< 50

Protection Class

III

Reverse Polarity Protection

Yes

Power-on Delay Time [s]

< 3

Outputs

Total Number of Outputs

Output Signal

Switching signal; analog signal; frequency signal; IO-Link

Maximum Voltage Drop Switching Output DC [V]

Maximum Current Load per Output [mA]

150; (200: - 60 ° C; Ambient Temperature; 250: - 40 ° C; Ambient Temperature)

Analog Current Output [mA]

4 - 20

Maximum Load [Ω ]

500

Short-Circuit Protection

Yes

Overload Protection

Yes

Frequency of the output [Hz]

0 - 10000

Measuring/Setting Range

Frequency at the end point FRP [Hz]

10 - 10000

In steps of [Hz]

Measuring dynamics

1: 50

Temperature Monitoring

Frequency at the end point FRP [Hz]

10 - 10000

Accuracy / deviations Flow monitoring

Accuracy (in the Measuring Range)

± 5 % MEW; (Q>1 l/min; 20 - 70 ° C Medium temperature)

Repeatability

± 1 % MEW

Temperature Monitoring

Temperature Drift

0,029 ° C / K

Accuracy [K]

3 K (25° C; Q>1 l/min)

Reaction Times Flow monitoring

Response Time [s]

0.01

Damping Process Value dAP [s]

0 - 5

In steps of [s]

0.1

Damping for the Analog Output dAA [s]

0 - 5

In steps of [s]

0.1

Temperature Monitoring

Dynamic Response T05 / T09 [s]

T09 = 120 (Q>1 l/min)

Software / Programming

Parameter Setting

Interfaces

Communication Interface

IO-Link

Transmission Type

COM2 (38,4 kBaud)

IO-Link Revision

1.1

SDCI Standard

IEC 61131-9 CDV

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

SIO Mode

Yes

Required Master Port Class

Process Data Analog

Process Data Binary

Minimum Process Cycle Time [ms]

3.2

Operating Conditions

Ambient Temperature [° C]

0 - 60

Storage Temperature [° C]

-15 - 80

Protection

IP 65
IP 67

Pressure Equipment Directive

Sound engineering practice

Mechanical Data

Weight [g]

1604

Material

Stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated

Materials (Wetted Parts)

Stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM

Process Connection

Threaded connection G 1 Internal thread

Switching Cycles Mechanical

10 million

Electrical Connection

Connection

Connector: 1 x M12; coding: A; Contacts: gold-plated

Return and Warranty

Please note that return requests for IFM items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

IFM SB7243 1 - 25 l/min Flow Meter for 320 mm2/s Viscosity Liquids

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews