| Product Characteristics |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Process Connection | Diameter Ø 8 mm |
| System | Gold-plated contacts |
| Installation | Recommended for pipe diameters; ( 15 - 400 mm) |
| Media | Air |
| Medium Temperature [° C] | -20 - 100 |
| Pressure Rating [bar] | 50 |
| Pressure Rating [MPa] | 5 |
| MAWP (for Applications According to CRN) [bar] | 50 |
| Electrical Data |
| Operating Voltage [V] | 18 - 30 DC; (to SELV/PELV) |
| Current Consumption [mA] | < 100 |
| Protection Class | III |
| Reverse Polarity Protection | Yes |
| Power-on Delay Time [s] | 10 |
| Inputs / Outputs |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Outputs |
| Total Number of Outputs | 2 |
| Output Signal | Switching signal; analog signal; frequency signal; IO-Link; (configurable) |
| Electrical Design | PNP/NPN |
| Number of Digital Outputs | 2 |
| Output Function | Normally open / closed; (configurable) |
| Maximum Voltage Drop Switching Output DC [V] | 2.5 |
| Permanent Current Rating of Switching Output DC [mA] | 250 |
| Number of Analog Outputs | 1 |
| Analog Current Output [mA] | 4 - 20; (scalable) |
| Maximum Load [Ω ] | 350 |
| Short-Circuit Protection | Yes |
| Type of Short-Circuit Protection | Yes (non-latching) |
| Overload Protection | Yes |
| Frequency of the output [Hz] | 0 - 1000 |
| Measuring/Setting Range |
| Probe Length L [mm] | 200 |
| Operating Mode | Relative; absolutely gaseous; (absolute: reference measurement recommended; Factory Setting: relative) |
| Display range [m/s] | 0 - 36 |
| Resolution [m/s] | 0.2 |
| Set point SP [m/s] | 2 - 30 |
| Reset point rP [m/s] | 0.6 - 28.6 |
| Analog start point ASP [m/s] | 0 - 24 |
| Analog end point AEP [m/s] | 6 - 30 |
| Frequency end point, FEP [m/s] | 6.6 - 30 |
| Frequency at the end point FRP [Hz] | 100 - 1000 |
| Gases - Operating Mode " absolute" |
| Setting Range [m/s] | 0 - 30 |
| Greatest Sensitivity [m/s] | 0.6 - 30 |
| Gases - Operating Mode " relative" |
| Setting Range [m/s] | 0 - 60 |
| Greatest Sensitivity [m/s] | 0.6 - 30 |
| Temperature Monitoring |
| Measuring Range [° C] | -20 - 100 |
| Resolution [° C] | 0.2 |
| Accuracy / deviations Gases - Operating Mode " absolute" |
| Repeatability | ± (3 % MW + 0,6 % MEW) |
| Gases - Operating Mode " relative" |
| Accuracy | ± (10 % MW + 2 % MEW); (reference conditions: DN50; Inside diameter 51 mm; within the range of maximum sensitivity: 20 ° C /<6 bar; Insertion depth: 15 mm; inlet pipe length: 2.5 m; standard velocity to DIN ISO 2533 at the sensor tip) |
| Repeatability | ± (3 % MW + 0,6 % MEW) |
| Temperature Monitoring |
| Temperature Drift | ± 0,005 K/° C |
| Accuracy [K] | ± 2 / + 8; (flow velocity>20 % VMR and 20 ° C: ± 2) |
| Reaction Times |
| Response Time [s] | 7 |
| Temperature Monitoring |
| Dynamic Response T05 / T09 [s] | 30 (T09); (Flow velocity: ≥ 10 m/s) |
| Software / Programming |
| Parameter Setting | Hysteresis / window; normally open / closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value color |
| Interfaces |
| Communication Interface | IO-Link |
| Transmission Type | COM2 (38,4 kBaud) |
| IO-Link Revision | 1.1 |
| SDCI Standard | IEC 61131-9 |
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO Mode | Yes |
| Required Master Port Class | A |
| Process Data Analog | 2 |
| Process Data Binary | 2 |
| Minimum Process Cycle Time [ms] | 3 |
| Operating Conditions |
| Ambient Temperature [° C] | -40 - 80 |
| Storage Temperature [° C] | -40 - 100 |
| Protection | |
| MTTF [Years] | 131 |
| Mechanical Data |
| Weight [g] | 343.8 |
| Material | Stainless steel (1.4404 / 316L); PBT-GF20; PBT-GF30 |
| Materials (Wetted Parts) | Stainless steel (1.4404 / 316L) |
| Process Connection | Diameter Ø 8 mm |
| Electrical Connection |
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated |
