| Product Characteristics |
| Number of Inputs and Outputs | Number of Digital Outputs: 2 |
| Process Connection | Threaded connection G 1/4 Internal thread |
| System | gold-plated contacts |
| Media | liquids and gases |
| Medium Temperature [°C] | -20 - 60 |
| Type of Pressure | Relative pressure; vacuum |
| Electrical Data |
| Operating Voltage [V] | 18 - 36 DC; (to SELV/PELV) |
| Current Consumption [mA] | <50 |
| Protection Class | III |
| Reverse Polarity Protection | Yes |
| Overvoltage protection | Yes; (<40 V) |
| Power-on Delay Time [s] | 0.3 |
| Integrated Watchdog | Yes |
| Inputs / Outputs |
| Number of Inputs and Outputs | Number of Digital Outputs: 2 |
| Outputs |
| Total Number of Outputs | 2 |
| Output Signal | Switching signal; IO-Link; (configurable) |
| Electrical Design | PNP/NPN |
| Number of Digital Outputs | 2 |
| Output Function | Normally open / closed; (configurable) |
| Maximum Voltage Drop Switching Output DC [V] | 2 |
| Permanent Current Rating of Switching Output DC [mA] | 250 |
| Switching Frequency DC [Hz] | <170 |
| Short-Circuit Protection | Yes |
| Type of Short-Circuit Protection | Yes (non-latching) |
| Accuracy / Deviations |
| Switch Point Accuracy [% of the Span] | ± 0,5 |
| Repeatability [% of the Span] | ± 0,1; (with temperature fluctuations<10 K) |
| Characteristics Deviation [% of the Span] | ± 0,25 (BFSL) /<± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis Deviation [% of the Span] | ± 0,25 |
| Long-Term Stability [% of the Span] | ± 0,05; (per 6 months) |
| Temperature coefficient Zero Point [% of the Span / 10 K] | 0,2; (0 - 60 °C) |
| Temperature Coefficient Span [% of the Span / 10 K] | 0,2; (0 - 60 °C) |
| Reaction Times |
| Delay Time Programmable dS, dr [s] | 0; 0,2 - 50 |
| Software / Programming |
| Parameter Setting | Hysteresis / window; normally open / closed; Diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display Unit |
| Interfaces |
| Communication Interface | IO-Link |
| Transmission Type | COM2 (38,4 kBaud) |
| IO-Link Revision | 1.1 |
| SDCI Standard | IEC 61131-9 CDV |
| Profiles | No profile |
| SIO Mode | Yes |
| Required Master Port Class | A |
| Process Data Analog | 1 |
| Process Data Binary | 2 |
| Minimum Process Cycle Time [ms] | 2.3 |
| Operating Conditions |
| Ambient Temperature [°C] | -20 - 60 |
| Storage Temperature [°C] | -40 - 100 |
| Protection | IP 65 |
| Tests / Approvals |
| ATEX marking | II 3D Ex tc IIIC T80°C Dc X |
| MTTF [Years] | 194 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Mechanical Data |
| Weight [g] | 304 |
| Material | Stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PEI; FKM; EPDM/X; PTFE |
| Materials (Wetted Parts) | Stainless steel (1.4305 / 303); ceramics; FKM |
| Minimum Pressure Cycles | 100 million |
| Process Connection | Threaded connection G 1/4 Internal thread |
| Restrictor Element Integrated | No (can be retrofitted) |
| Electrical Connection |
| Connector: 1 x M12; coding: A; Contacts: gold-plated |
