| Product Characteristics |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Process Connection | Threaded connection G 1 external thread Aseptoflex Vario |
| System | gold-plated contacts |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium Temperature [°C] | -25 - 125; (145 Maximum 1h) |
| Vacuum Resistance [mbar] | -1000 |
| Type of Pressure | Relative pressure; vacuum |
| No Dead Space | Yes |
| MAWP (for Applications According to CRN) [bar] | 30 |
| Electrical Data |
| Minimum Insulation Resistance [MΩ] | 100; (500 V DC) |
| Protection Class | III |
| Reverse Polarity Protection | Yes |
| Integrated Watchdog | Yes |
| 3-Wire |
| Operating Voltage [V] | 20 - 32 DC |
| Current Consumption [mA] | 3.6 - 21 |
| Power-on Delay Time [s] | 1 |
| 3-Wire |
| Operating Voltage [V] | 18 - 32 DC |
| Current Consumption [mA] | <45 |
| Power-on Delay Time [s] | 0.5 |
| Inputs / Outputs |
| Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
| Outputs |
| Total Number of Outputs | 2 |
| Output Signal | Switching signal; analog signal; IO-Link; (configurable) |
| Electrical Design | PNP/NPN |
| Number of Digital Outputs | 2 |
| Output Function | Normally open / closed; (configurable) |
| Number of Analog Outputs | 1 |
| Analog Current Output [mA] | 4 - 20, invertible; (scalable) |
| Short-Circuit Protection | Yes |
| Type of Short-Circuit Protection | Yes (non-latching) |
| Overload Protection | Yes |
| 3-Wire |
| Maximum Load [Ω] | 300 |
| 3-Wire |
| Maximum Voltage Drop Switching Output DC [V] | 2 |
| Permanent Current Rating of Switching Output DC [mA] | 250 |
| Switching Frequency DC [Hz] | 125 |
| Maximum Load [Ω] | (Ub - 10 V) / 20 mA |
| Accuracy / Deviations |
| Switch Point Accuracy [% of the Span] | ± 0,2; (Turn down 1: 1) |
| Repeatability [% of the Span] | ± 0,1; (with temperature fluctuations<10 K; Turn down 1: 1) |
| Characteristics Deviation [% of the Span] | ± 0,2; (Turn down 1: 1, linearity, incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity Deviation [% of the span] | ± 0,15; (Turn down 1: 1) |
| Hysteresis Deviation [% of the Span] | ± 0,15; (Turn down 1: 1) |
| Long-Term Stability [% of the Span] | ± 0,1; (Turn down 1: 1; per year) |
| Temperature coefficient Zero Point [% of the Span / 10 K] | ± 0,05; (0 - 70 °C) |
| Temperature Coefficient Span [% of the Span / 10 K] | ± 0,15; (0 - 70 °C) |
| Reaction Times |
| Damping Process Value dAP [s] | 0 - 30 |
| Damping for the Analog Output dAA [s] | 0.01 - 99.99 |
| 3-Wire |
| Step Response Time Analog Output [ms] | 45 |
| 3-Wire |
| Minimum Response Time of Switching Output (dAP) [ms] | 3 |
| Step Response Time Analog Output [ms] | 7 |
| Interfaces |
| Communication Interface | IO-Link |
| Transmission Type | COM2 (38,4 kBaud) |
| IO-Link Revision | 1.0 |
| Profiles | No profile |
| SIO Mode | Yes |
| Required Master Port Class | A |
| Process Data Analog | 1 |
| Process Data Binary | 2 |
| Minimum Process Cycle Time [ms] | 2.3 |
| Operating Conditions |
| Ambient Temperature [°C] | -25 - 80 |
| Storage Temperature [°C] | -40 - 100 |
| Protection | |
| MTTF [Years] | 154 |
| Mechanical Data |
| Weight [g] | 359.5 |
| Material | Stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA |
| Materials (Wetted Parts) | Ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra<0,4 / Rz 4; PTFE |
| Minimum Pressure Cycles | 100 million |
| Process Connection | Threaded connection G 1 external thread Aseptoflex Vario |
| Display Unit | Bar; kPa; psi; % of the span |
| Electrical Connection |
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated |
