Product Characteristics |
Measuring Principle | MEMS capacitive |
Communication Interface | IO-Link |
Inclination Measurement |
Number of Measurement Axes | 2 |
Angular Range [°] | ± 180 |
Function Principle | Static |
Electrical Data |
Operating Voltage [V] | 9.2 - 30 DC; (voltage output: 12 - 30 DC; IO-Link: 18 - 30 DC) |
Current Consumption [mA] | 90; (24 V DC, 25 °C) |
Maximum Current Consumption [mA] | 330; (9,2 V DC; -40 °C) |
Protection Class | III |
Reverse Polarity Protection | Yes |
Reverse Polarity Protection | Yes |
Power-on Delay Time [s] | 300; (warm-up time; Maximum initialization time: 1000 ms) |
Inputs / Outputs |
Number of Inputs and Outputs | Number of Digital Outputs: 2; Number of Analog Outputs: 2 |
Outputs |
Total Number of Outputs | 4 |
Output Signal | Analog signal; switching signal |
Electrical Design | PNP/NPN |
Number of Digital Outputs | 2 |
Output Function | Normally open / closed; (programmable) |
Maximum Voltage Drop Switching Output DC [V] | 2.5 |
Permanent Current Rating of Switching Output DC [mA] | 125; (125 mA (85° C); 200 mA (60° C); 250 mA (40° C)) |
Number of Analog Outputs | 2 |
Analog Current Output [mA] | 4 - 20; (in case of a fault: 2 mA) |
Maximum Load [Ω] | 220; (220 (9,2 - 15 V) / 500 (15 - 30 V)) |
Analog Voltage Output [V] | 2 - 10; (in case of a fault: 1 V) |
Minimum Load Resistance [Ω] | 1000; (10000 (12 - 13,5 V) / 1000 (13,5 - 30 V)) |
Precision Analog Output [%] | ≤ 1 |
Short-Circuit Protection | Yes |
Overload Protection | Yes |
Measuring/Setting Range |
Measuring Principle | MEMS capacitive |
Inclination Measurement |
Number of Measurement Axes | 2 |
Angular Range [°] | ± 180 |
Limit frequency [Hz] | 0.5 - 10; (configurable) |
Vibration measurement |
Measuring Range of Vibration [g] | 16; (± 2; ± 4; ±8 g configurable) |
Measuring Range of vibration [mm/s] | 3200 |
Frequency Range [Hz] | 0.1 - 400 |
Number of Measurement Axes | X/Y/Z configurable |
Accuracy / Deviations |
Accuracy [°] | ≤ ± 0,5; (absolute) |
Hysteresis [°] | ≤ ± 0,05 |
Repeatability [°] | ≤ ± 0,1 |
Resolution [°] | 0.05 |
Temperature Coefficient [1/K] | ≤ ± 0,02 ° |
Software / Programming |
Parameter Setting | Angle (X/Y) / vibration (Veff / aPeak); hysteresis / window; Switch points; switching logic; fault indication; self-test; current/voltage output |
Interfaces |
Communication Interface | IO-Link |
Transmission Type | COM2 (38,4 kBaud) |
IO-Link Revision | 1.1 |
SDCI Standard | IEC 61131-9 CDV |
Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
SIO Mode | Yes |
Required Master Port Class | A |
Process Data Analog | 2 |
Process Data Binary | 2 |
Minimum Process Cycle Time [ms] | 5 |
Operating Conditions |
Ambient Temperature [°C] | -40 - 85 |
Storage Temperature [°C] | -40 - 85 |
Protection | |
MTTF [Years] | 176 |
Standard | Compliant with ECE R 10, rev. 5; ISO 7637-3: 2007-07 |
Mechanical Data |
Weight [g] | 410 |
Dimensions [mm] | 90 x 62 x 33.2 |
Material | Housing: diecast zinc nickel-plated |
Mounting Orientation | Horizontal |