Gossen Metrawatt M246S MetraHit T-Com Plus Cable Multimeter

Gossen Metrawatt, M246S, MetraHit T-Com Plus Cable Multimeter for Measurements in Symmetrical Copper Cable Networks with Signature Analysis

M246S Includes Only:

• 1 cable multimeter
• 1 protective rubber cover
• 1 KS21T cable set (600 V CAT III) consisting of:
  • 1 two-conductor measurement cable (yellow/blue)
  • 2 meters long with test probes
  • 1 earth terminal cable (black)
  • 2 meters long with a test probe
• 1 condensed operating instructions, English/German
• 1 DAkkS calibration certificate with calibration report
• 2 batteries, 1.5 V, type AA, installed

Features:

• Insulation resistance measurement (test voltage: 10 and 100 V) with simultaneous detection of interference voltage and polarity reversal for diode testing
• Interference-immune capacitance measurement and cable length measurement
• Galvanic signature analysis
• Cable symmetry testing by means of rapid changeover switching
• Multifunctional multimeter (V, Ohm, F, Hz, diode testing, acoustic continuity, mA, A)
• TRMS measurement, TRMS AC, and AC+DC for current and voltage
• A low-pass filter can be activated (200 Hz / -3 dB)
• Direct current measurement, 100 nA to 1 A
• Precision temperature indication in °C and °F for Pt100/Pt1000 sensors
• 3-3/4 place display, 3100 digits, illumination can be activated, analog display: linear or logarithmic for insulation measurement
• Acoustic signal for continuity testing, dangerous contact voltages, exceeded overload limits
• Min-Max value storage and Auto Data Hold
• Data memory and internal clock, power pack adapter socket
• Housing with IP 54 protection, dust and splash protection, protective rubber cover as a standard feature
• Bidirectional infrared interface for exchanging Data with a PC
• DAkkS calibration certificate as a standard feature

It performs measurements for pinpointing errors in cable networks. It measures all cable and system-related parameters such as voltage, current, resistance, insulation and loop resistance, capacitance and cable length. Interruption of a single core, or contact with an open-circuit core (capacitive asymmetry), is detected by means of polarity reversal and is indicated at the high-speed logarithmic bar graph display.