Gossen, M503N-10M, Mavolux 5032B USB Illuminance Meter with 10 m Probe Cable
M503N-10M Includes Only:
- Mavolux 5032B
- Aluminum case
- GLUX 2 software
- USB cable
- Battery
- Operating instructions
Features:
- Maximum Precision: Classified measurement of illuminance in lx or fc in accordance with class B or class C per DIN 5032-7, appendix B of DIN EN 13032-1 and CIE 69.
- Cosine Corrections: The luminosity of a flat measuring surface is proportional to the cosine of the incident angle of light. This relationship is taken into consideration by the sensor during evaluation.
- Non-Volatile Memory: 100 measured values can be saved, retrieved, or transmitted to a PC via the integrated USB port. Average illuminance values can also be calculated as a result.
- Broad Measuring Range: High initial sensitivity and a resolution of 0.01 lx or 0.001 fc for the Mavolux 5032 B USB, right on up to large illuminance values of 199,900 lx or 19,990 fc.
- Simple Expansion of Functions: Unclassified measurement of luminance in cd/m2 or fL is made possible by the optional luminance attachment. An additional adapter disc prevents erroneous measurements due to the incidence of light from the side.
- Convenient Everyday Use: Simple operation, easy-to-read display, compact design, and protection during transport in a high-quality aluminum case.
- V(λ) Adaptation: The spectral sensitivity of the silicon photodiode is color corrected and corresponds to the spectral brightness sensitivity of the human eye V(λ). The quality of this adaptation represents a significant difference between the class B and class C variants.
- Computer-Aided Measurement: The meter's continuous operating mode is assured thanks to the power supply via the USB port. Meter control, as well as reading, display, and storage of measured values, is managed with GLUX 2 s.
This High Precision Luxmeter, due to its outstanding accuracy in accordance with class B, is used primarily for certification and inspection applications. An additional measuring range with high initial sensitivity of 0.01 lx makes it possible to measure extremely small light intensities. This even permits reliable measurement of emergency lighting.
After pressing the HOLD key, the measured value is saved to memory and the display illumination included with this version is activated, making it possible to read the display in dark environments. Adaptation to the spectral brightness sensitivity of the human eye V(λ) is highly precise with minimal deviation of just f1‘ < 3 %. Both variants can be used as unclassified luminance meters with the help of an optional luminance attachment with an acceptance angle of 15°. Luminance is measured in candelas per square meter (cd/m2) or foot-lamberts (fL) and defines the perceived brightness of a back-lighted or reflecting surface.
