Gefen, GTB-UHD600-HBT, 4K Ultra HD 600 MHz HDBaseT Extender Set with HDR, RS-232, 2-Way IR & PoL (264')
Includes Only:
- Gefen 4K Ultra HD 600 MHz HDBaseT Extender Set with HDR, RS-232, 2-Way IR & PoL (264')
- HDMI-to-HDMI Male-to-Male Locking Cable (6')
- Gefen Single Infrared Emitter
- Gefen IR Extender Module
- 12 VDC Power Supply with US/EU/UK/AU AC Plugs & 5.5/2.1mm DC Plug
Extend full-bandwidth HDMI 2.0 with HDR up to 264' over a single Cat 5 or better cable with the 4K Ultra-HD 600 MHz HDBaseT Extender Set from Gefen, supporting 18.2 Gb/s of data throughout and 600 MHz TMDS clock frequency. Featuring HDBaseT technology as well as Gefen's compression algorithms with high peak signal-to-noise ratio, this extender set accommodates resolutions up to 4K Cinema-DCI and 4K Ultra-HD with high dynamic range. HDR delivers greater contrast between light and dark areas of a video image, resulting in enhanced picture quality and color depth.
This extender set supports both HDCP 2.2 and HDCP 1.4 encryption, as well as 1080p full HD, WUXGA 1920 x 1200, 3DTV, and Deep Color at up to 1080p resolution. High-performance multichannel digital audio, including 7.1 channels of LPCM and HBR digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio, are passed through to the HDMI outputs. The GTB-UHD600-HBT provides RS-232 and two-way IR extension between sender and receiver, facilitating the control of A/V sources placed near the sender and sending automation commands to the display or another device placed near the receiver.
Gefen's bidirectional PoL technology powers the sender or the receiver unit using the same cable that extends the HDMI signal. Only one of the two units needs to be fed by a power supply. This feature simplifies installation when no electrical outlets are available near the source or the display. Small and low-profile, the sender and receiver enclosures can be securely surface-mounted and hidden away from sight. They accommodate locking HDMI cables (included).
Supports 18.2 Gb/s bandwidth and 600 MHz TMDS clock
Extends HDMI, RS-232 & bidirectional IR over a single Cat 5e or Cat 6a cable
HDMI features supported:
- HDMI 2.0, full bandwidth to 18 Gb/s / 600 MHz
- HDR 10-bit Deep Color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
- HDCP 2.2 and 1.4
- 12-bit Deep Color at 1080p
- Uncompressed LPCM digital audio up to 7.1 channels
- HBR (High Bit Rate) digital audio up to 7.1 channels, including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio
- 3DTV pass-through
- CEC pass-through
- Lip Sync pass-through
Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920 x 1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (available separately)
RS-232 two-way link between sender and receiver
IR extension from sender to receiver and from receiver to sender
Bidirectional PoL provides power to the sender or the receiver unit over the link cable—only one side needs external power
Uses Gefen's implementation of HDBaseT technology with proprietary algorithms and enhanced features
Advanced EDID management
Firmware updatable via RS-232
Locking power connector
Surface mountable
Plug & play—no configuration or setup required for most applications
Compact sender and receiver enclosures are easy to install and can be hidden away