This HDMI over IP Extender use the advanced M-JPEG as the compression type, which makes it occupy lower bandwidth and transmit over the LAN more smoothly.
It supports 393ft/120M over the single cat5e/6 cable at the point to point, as well as point to many over Ethernet switch. The over IP solution is widely used in various locations, like meeting room, classroom, metro, airport, home, mall advertisement...etc
Features:
- Build in EDID
- HDCP compliant
- By pass RS232 signal, baud rate up to 115200
- Support PC web control
- Support LPCM audio format
- Support 1 to 1 or 1 to many modes with large cascade
- Using M-JPEG compression encoding, support resolution up to 1080p@60hz
- Bi-direction Wide-band IR passes through to control the source or sink device. (38khz to 56khz)
- Comply with TCP/IP protocol, Transmit up to 120meters@1080p/60Hz over single Cat5e/6 cable
- Carry power to Tx and Rx units with a Power Over Ethernet enabled Smart Managed Switch (*Optional POE version only)
Includes Only:
- User manual x1
- IR-Blaster cable x2
- IR-Receiver cable x2
- Main unit Receiver x1
- Main unit Transmitter x1
- Phoenix plugs for RS232 cable termination x2
- 5V Power adapter x2
- Putin: 100 - 240V 50/60Hz 0.4A Max
- Putout: 5.0V 2000mA
The unit provides a path to pass through the RS 232 signal, RS 232 passes from Tx to Rx or Rx to Tx, connect to your RS 232 devices, such as PC, IP camera, Creston control panel, Smart Matrix, printer and Scanner and so on. It works when Tx, Rx, and your RS232 devices baud rate are the same.
