| Output |
| Relay Rating | 2A/240 VAC, life cycles 200,000 for resistive load |
| Pulsed Voltage | Source Voltage 5V, 30mA, current limiting resistance 66 ohms |
| Linear Output (PCM) | |
| Control Function |
| Control Action | Direct and reverse |
| Proportional Band Linear Input | 0.1 to 900.0 |
| Proportional Band Temperature | 0.1 to 500C (0.1 to 900F) |
| Reset (Auto) | 0 to 3600 seconds |
| Rate (Derivative) | 0 to 900.0 seconds |
| PB Offset | 0 to 100% |
| Dual PID Heat/Cool Proportional Deadband | -36.0% to +36.0% of heat PB |
| Dual PID Heat/Cool Proportional Band | 50 to 300% of heat PB |
| Time Proportioning Cycle Time | 0.1 to 90 seconds |
| On-Off / Alarm Hysteresis | On-Off / Alarm Hysteresis |
| Logic High | 2V minimum, 10V maximum |
| Logic Low | -10V minimum, 0.8V maximum |
| Approval Standards | UL 61010C-1,EN 61010-1 (IRC-1010-1), EMC 61326, RoHS 2.0 Compliant, W.E.E.E, FM temperature limit switch - indicating |
| Analog Retransmission |
| Output Signal | 4-20 mA, 0-20 mA, 0 - 5VDC, 1 - 5VDC, 0 - 10VDC |
| Resolution | 15 bits |
| Accuracy | +/-0.05% of span +/-0.0025%/ C Load |
| Resistance | 0 - 500 ohms (for current output), 10K ohms minimum (for voltage output) |
| Output Regulation | 0.01% for full load change |
| Output Settling Time | 0.1 sec. (stable to 99.9%) |
| Isolation Breakdown Voltage | 1000 VAC min. Integral |
| Linearity Error | +/-0.005% of span |
| Temperature Effect | +/-0.0025% of span per degree C |
| Saturation Low | 0 mA (or 0 VDC) |
| Saturation High | 22.2 mA (or 5.55VDC, 11.1VDC min) |
| Linear Output Range | 0-22.2mA (0-20mA or 4-20mA) |
| Volts DC | 0 - 5.55VDC (0 - 5VDC, 1 - 5VDC), 0 - 11.1VDC (0 - 10VDC) |
| Linear Output (PCM) | |
| Resolution | 15 bits |
| Output Regulation | 0.02% for full load change |
| Output Settling Time | 0.1 sec. (stable to 99.9%) Isolation |
| Breakdown Voltage | 1000 VAC |
| Temperature Effect | +/- 0.01% of span per degree C |
| Input |
| Resolution | 18 bits |
| Sampling Rate | 5 times / second |
| Maximum Rating | -2VDC minimum, 12VDC maximum |
| Temperature Effect | A1.5uV/ C for all inputs except mA input, A3.0uV/ C for mA input |
| Sensor Lead Resistance Effect | T/C: 0.2uV/ohm, 3-wire RTD: 2.6 C/ohm of resistance, difference of two leads, 2-wire RTD: 2.6 C/ohm of resistance sum of two leads |
| Sensor Break Responding Time | Within 4 seconds for TC, RTD and mV inputs, 0.1 second for 4-20 mA and 1 - 5VDC inputs |
| Burn-out Current | 200 nA |
| Common Mode Rejection Ratio (CMRR) | 120dB |
| Normal Mode Rejection Ratio (NMRR) | 55dB |
| Sensor Break Detection | Sensor open for TC, RTD and mV inputs, Sensor short for RTD input, below 1 mA for 4-20 mA input, below 0.25VDC for 1 - 5VDC input |
| Electrical Isolation | Optical isolation; 1500V~ (ac) minimum, between input signals and power supply circuit |
| Display |
| Display type | 4.3" TFT color touch display |
| Resolution | 480 x 272 |
| Colors | 65,536 |
| Display Processor | PV210 CPU/1GHZ |
